A dull or chipped tub in Clinton does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Maybe you look at your bathroom every single morning and just sigh because the tub has seen way better days. Over time, that shiny surface gets dull, stained, and honestly just gross, no matter how hard you scrub it with bleach. Replacing the whole thing costs a fortune and creates a giant mess in your home, which is why a much smarter option exists to save your sanity and your wallet.
Fortunately, our team of local surface restoration pros can make that old fixture look brand new in just a few hours. We come right to your house and apply a gorgeous, durable new coating that bonds directly to your existing cast iron or fiberglass tub. This fast process saves you thousands of dollars compared to a messy demolition job, and it gives you a sparkling clean wash basin you can actually enjoy again.
If you want to transform your bathroom without the headache of a major remodel, you should get a free estimate from us today. We love helping homeowners get that clean, fresh feeling back in their bathrooms without blowing their life savings. Our friendly crew is ready to roll out to your home, check out your setup, and give you a clear price quote with zero obligations.
Many folks do not realize that you do not have to rip out a heavy tub just because the top layer is stained or scratched. Instead of paying plumbers and contractors to tear up your walls, we use high-tech coatings to cover the old surface completely. This specialized liquid acrylic compound cures into a rock-hard shell that looks exactly like shiny new porcelain.
Because we use professional-grade bonding agents, the new layer will not peel or chip off when you take a hot shower. First, we acid-wash the old surface to strip away decades of soap scum and hard water deposits. After that, we repair any deep chips or cracks with a heavy-duty polyester filler so the final result is perfectly smooth. Finally, we spray on several coats of the topcoat to create a beautiful, glossy finish that makes the whole room feel clean.
| The Big Steps | What We Actually Do | The Big Benefit to You |
|---|---|---|
| Deep Cleaning | Strip away soap scum, oils, and old mineral buildup with specialized solutions | The new coating sticks perfectly so it never peels off down the road |
| Crack Repair | Fill in ugly chips, rust spots, and scratches with durable fillers | Your old tub looks completely flat and brand new again |
| Spray Coating | Apply multiple layers of high-gloss acrylic polymer using professional spray guns | You get a super shiny finish that is incredibly easy to wipe clean |
This whole process takes less than a day, meaning you do not have to live in a construction zone for weeks. Once we pack up our gear, you only have to wait a little while for the surface to cure before you can jump in and take a relaxing bath. This quick turnaround lets you get back to your normal routine with almost zero disruption to your busy life.
Tearing out a built-in tub is a total nightmare because it usually involves breaking tiles, moving pipes, and creating heaps of dusty drywall debris. Which means you end up paying for a dumpster, a plumber, a tile setter, and a painter just to fix one bathroom. By choosing our smart restoration service instead, you bypass all that chaos and keep your hard-earned money in your bank account.
On top of that, older tubs are often made of incredibly tough cast iron that holds heat much better than cheap modern plastic replacements. Keeping your original fixture is actually a huge win because those old-school tubs were built like absolute tanks. By letting us recoat it, you retain that heavy-duty quality while upgrading the look to match modern aesthetic standards.
To make things even better, our specialized coatings are designed to resist mold and mildew growth much better than old, porous porcelain. This lets you spend way less time on your knees scrubbing the tub with harsh chemical cleaners. A quick wipe with a mild soap and a soft sponge is all it takes to keep that brilliant luster alive for many years to come.
Imagine having a crew of loud construction workers trampling through your house for a week straight just to swap out a bath fixture. That sounds exhausting, especially if you have kids, pets, or work from home during the day. Our streamlined process only takes about four to six hours from the moment we walk through your front door to the final cleanup.
This speed means your daily routine barely suffers a hiccup, and you can use your bathroom again in no time. We also use powerful exhaust fans to pull any paint fumes directly out of your house while we work. You get to enjoy a gorgeous, updated space without dealing with dusty mess or lingering chemical smells for days on end.
Living in Prince George's County is great, but we all know that home maintenance costs can add up super fast if you are not careful. With a local median household income of $108,622, folks around here appreciate high-quality work that does not cost an absolute arm and a leg. Saving money on bathroom updates means you have more cash left over for fun weekend trips or other important family expenses.
Actually, our surface renewal service costs a mere fraction of what a traditional bathroom remodel would run you. This awesome savings lets you upgrade other parts of your home, or maybe just treat yourself to something nice. You get the exact same visual upgrade as a brand new tub, but you keep thousands of dollars right where they belong.
When you contact us for your free quote, we do not play any annoying sales games or hit you with hidden fees later on. We believe in being totally upfront with our neighbors, which is why we explain every single step of the restoration before we start. Our technicians treat your home with the utmost respect, laying down protective drop cloths to keep your floors spotless.
After we prep the area, we carefully mask off all your tiles, walls, and plumbing fixtures so no overspray lands where it should not. We then apply our industrial-grade bonding agent, which acts like a super-glue between the old surface and the new topcoat. This step is super critical because skipping it is the main reason why cheap DIY kits always fail and peel within a few months.
Once the glossy layers are sprayed and cured, we carefully remove all the tape and clean up our workspace. We leave your bathroom looking incredibly fresh, clean, and ready to show off to your guests. Our team will also give you some simple tips on how to care for your new finish so it stays looking beautiful for a decade or more.
There is absolutely no reason to keep living with an ugly, stained tub that makes you feel embarrassed when guests visit. Whether you live near the local schools, parks, or quiet residential neighborhoods of Clinton, Maryland, we are always ready to head over and help you out. With a population of 40,027 people in this lovely community, we have helped tons of your neighbors fall in love with their bathrooms all over again.
If you reside in the 20735 area, our professional crew can be at your doorstep quickly to assess your tub and give you a free, no-pressure quote. We take pride in our craftsmanship and love seeing the happy looks on our clients' faces when they see the final transformation. Let us take care of the hard work while you sit back, relax, and think about that warm, peaceful bath you will be enjoying soon.
So, what are you waiting for? Reach out to us today to schedule your free estimate and take the first step toward a brighter, cleaner bathroom. We are excited to show you just how easy and affordable it is to bring your old tub back to life!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Clinton, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558