A dull or chipped tub in Dos Rios does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Maybe you look at that old tub every morning and sigh at the ugly stains.
Actually, those dark rings and rough patches are not even your fault.
Years of harsh scrubbing can completely strip away the original glossy factory finish.
This leaves the underlying surface porous and ready to absorb every speck of dirt.
Fortunately, you do not have to spend thousands of dollars on a messy demolition project.
Our local crew brings back that gorgeous factory shine right inside your home.
We specialize in restoring your existing bathroom fixtures to a beautiful, clean state.
By choosing this smart update, you avoid the headache of dealing with dusty drywall tear-outs.
Which means you get a fresh, sparkling bathroom without the massive price tag.
Replacing a tub sounds simple until you actually start pulling the old one out.
Suddenly, you find hidden water damage behind the walls and plumbing that needs updating.
These unexpected problems can easily turn a weekend project into a two-week nightmare.
On top of that, tile surrounds often break during the removal process.
This forces you to retile the entire space, which drains your savings fast.
Our specialized surface restoration process completely bypasses these costly headaches.
Instead of ripping things apart, we work with what you already have.
We apply a high-performance coating that bonds directly to your old porcelain or fiberglass.
This durable layer delivers a beautiful, smooth finish that looks brand new.
| Project Factor | Full Tub Replacement | Our Surface Restoration |
|---|---|---|
| Average Cost | Very High (Thousands of Dollars) | Affordable (Fraction of Replacement) |
| Time to Complete | Multiple Days or Weeks of Mess | Usually Just a Single Day |
| Permits Required | Often Yes (Plumbing/Building) | Never Needed |
| Mess and Dust | Extremely Dusty and Loud | Very Minimal and Contained |
First, we meticulously clean the area to remove every trace of soap scum.
This initial prep work is absolutely crucial for a long-lasting bond.
We use specialized cleaners that strip away decades of oils and hard water deposits.
Next, we carefully repair any deep chips, scratches, or rusty spots.
We fill these imperfections with a waterproof compound that cures incredibly fast.
Once dry, we sand the surface perfectly flat so the damage vanishes completely.
After that, we apply a proprietary bonding agent to ensure maximum adhesion.
This chemical bridge locks the new topcoat to the old substrate forever.
Then, we spray multiple layers of our high-gloss acrylic coating for a flawless look.
Now, you might wonder about the fumes during this spray application.
Indeed, the coatings we use do have a strong chemical scent while wet.
That is why we always set up professional exhaust fans to protect your indoor air.
We seal off the bathroom doors with heavy plastic sheeting to keep odors contained.
These high-powered blowers pull the fumes out through the nearest window safely.
Within a few hours of completion, the smell clears out completely.
This leaves you with a safe, odor-free home and a beautiful bathroom.
You can typically use your newly finished fixture within twenty-four to forty-eight hours.
This quick turnaround time is perfect for busy households with only one bathroom.
To keep this new finish looking spectacular, you must avoid abrasive cleaners.
Bleach and scrubbing powders will eventually dull the beautiful glossy protective layer.
Instead, we recommend using mild dish soap and a soft microfiber sponge.
This gentle cleaning routine keeps the surface slick and incredibly easy to wipe down.
Dirt and soap residue simply slide off without needing any hard elbow grease.
This saves you precious time during your weekly household chore routine.
Additionally, we advise against leaving wet bottles or soapy washcloths on the ledge.
Standing water can eventually weaken the bond over many years of neglect.
A little basic care ensures your investment stays beautiful for a decade or more.
Living in a peaceful, scenic area means you value quality craftsmanship and honest service.
We proudly serve homeowners throughout Mendocino County with reliable, top-tier workmanship.
Our small-town values mean we treat your home with the utmost respect and care.
Whether you reside near the beautiful forks of the Eel River or closer to the main highways, we come directly to you.
The small, tight-knit community of Dos Rios, California, deserves the absolute best home improvement services.
We understand the unique charm of homes in the 95429 ZIP code area.
With a local population of around 70 residents, word of mouth is everything to us.
We strive for perfection on every single job because our reputation is our livelihood.
Our team works hard to deliver results that make you proud of your home.
Are you ready to transform your outdated bathroom without breaking the bank?
We are happy to visit your property and evaluate your fixtures in person.
This allows us to give you a highly accurate, upfront price with zero hidden fees.
Our friendly technicians will explain the entire process and answer your questions.
We believe in honest communication so you can make the best decision for your budget.
There is absolutely no obligation or pressure when you request our pricing.
Let us help you fall in love with your bathroom all over again.
Contact us today to schedule your convenient, cost-free consultation at your home.
We look forward to giving your old fixtures a stunning, durable second life.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Dos Rios, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558