All over Garland County, worn bathtubs are resurfaced in place: repairs first, gloss second, fresh caulk on the way out.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Are you tired of staring at that chipped or stained basin where you wash away your daily stress? You can transform that eyesore into a brand new focal point without tearing apart your entire space.
Think about how much easier your mornings will feel when you finally see a clean and shiny surface every single day. This process saves you thousands of dollars compared to a full bathroom demolition and renovation. You deserve a bathroom that feels like a luxurious escape instead of a dusty relic from the past.
Essentially, this process involves applying a high-grade liquid coating directly onto your existing porcelain or fiberglass unit. This specialized substance creates a hard and durable shield that resists stains and keeps your bathroom looking fresh. Because the material bonds tightly to the original structure, you get a finish that feels incredibly smooth to the touch.
By choosing this route, you skip the messy construction debris that usually piles up in your hallways. Everything stays tidy since the technicians handle the prep work and the application right inside your home. You save significant time because the entire job happens in a fraction of the time required for a traditional swap.
Typically, replacing a heavy tub requires removing doors, frames, and plumbing components that often break during the process. When you choose to coat the existing structure, you avoid all those hidden costs and structural headaches. You keep the original shape you already like while getting a pristine new appearance at a lower price point.
Furthermore, this method proves to be an environmentally friendly choice for your home. You prevent heavy waste from entering the local landfill by keeping your perfectly functional, albeit ugly, basin in place. This lets you contribute to a cleaner planet while simultaneously upgrading your personal space.
First, the team arrives to deep clean and remove all soap scum and mineral deposits. This step is critical because the new layer needs a completely clean surface to bond properly. Without this intense cleaning, the finish would eventually peel off, which is why professionals use industrial-grade solvents.
Next, they fill in any cracks or chips with a special bonding agent. This creates a uniform surface that looks just like brand new material. Finally, they spray the protective coating in several thin layers to ensure a thick and resilient barrier.
| Step | What happens | Benefit for you | |
|---|---|---|---|
| Deep cleaning | Removing grime | Better adhesion | |
| Repair work | Filling chips | Smooth surface | |
| Application | Spraying coat | Long lasting look |
Living in a beautiful area like the heart of Arkansas means you value the quality of your home. With a median household income that varies across different ZIP codes, most families look for smart ways to stretch their renovation budget. Taking care of your property value is vital, especially when you want to attract future buyers or just enjoy your home.
Whether you live near the lakes or closer to the town center, having a professional touch makes all the difference. You do not want a DIY kit that peels after six months of use. Hiring someone local who knows the area ensures you get reliable service that lasts for years.
Some people worry that the smell will linger for days, but modern ventilation technology solves that problem. The fumes dissipate quickly, leaving behind nothing but a fresh and clean appearance. You can return to using your bathroom shortly after the curing process finishes, which is usually quite fast.
Another common fear is that the finish will feel cheap or plastic, but that is simply not true. Once cured, the surface mimics the look and feel of high-end porcelain or enamel. You get the same physical sensation of a luxury tub without the hefty price tag associated with high-end fixtures.
Maintenance for a refreshed surface is actually much easier than caring for old, porous porcelain. Because the new layer is non-porous, dirt and mold have a hard time sticking to the surface. You can use gentle cleaning products to keep it shining like a diamond for a long period.
Avoid using harsh scrubbers or abrasive chemicals because they can scratch the new finish. Instead, wipe it down with a soft cloth and mild soap to maintain that wonderful state of repose. You will find that your cleaning routine becomes much faster and more effective than it ever was before.
Before you invite a technician over, clear out all your personal toiletries and decorations from the room. This gives the contractor enough space to move around and cover the surrounding tiles properly. You want them to focus entirely on the basin without having to worry about your shampoo bottles.
Think about any other areas in the room that might need a touch-up while they are there. Sometimes, people choose to have the surrounding wall tiles coated at the same time for a cohesive look. This creates a beautiful harmony that makes the whole room feel like a custom renovation.
You benefit from working with a professional who knows the specific water conditions in this region. If your water is hard, the technician can suggest extra protective measures for your finish. This attention to detail prevents future staining and keeps the surface looking its best regardless of local water quality.
Additionally, a local pro is always just a short drive away if you ever have a quick question. You build a relationship with a neighbor who cares about their reputation in the local community. That sense of accountability is something you just cannot get from a large national chain.
If you plan to sell your home, this is one of the best ways to boost curb appeal. Buyers often look at the kitchen and the bathroom first when they walk through a house. A sparkling white basin signals that you cared for the property and maintained it well.
You can increase your chances of a quick sale by highlighting this recent improvement in your listing. It tells the buyer that they do not need to worry about hidden plumbing costs immediately after moving in. That peace of mind is worth a lot to potential homeowners who are already stressed about moving.
Now is the perfect time to reach out and see what your options are. Since every basin has a unique size and condition, an on-site visit is the best way to get an accurate price. You have nothing to lose by asking for a professional opinion on the state of your fixture.
Taking this small step today puts you on the path toward a much better home experience. You will wonder why you waited so long to fix those embarrassing chips and dull spots. Just let us know when you are ready, and we will come by to give you a clear estimate.
You hold the power to decide what your home looks like every single day. A small change in your bathroom can ripple out and make the whole house feel cleaner and newer. Do not let those old stains dictate how you feel when you wake up in the morning.
We are ready to guide you through this simple process from start to finish. You get the benefit of our experience while we provide the hard work needed for a perfect result. Your satisfaction is the main goal, and we love seeing the surprise on your face when you see the final product.
You know that high-quality work pays for itself through longevity and reduced maintenance needs. When you compare the cost of a full remodel versus this efficient resurfacing, the choice becomes very clear. You save money, you save time, and you save the environment all at once.
Reach out now to schedule your free estimate and start your journey toward a better bathroom. We look forward to showing you exactly how we can restore your fixture to its former glory. Let us make your home the comfortable place you deserve it to be every single day.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558