A dull or chipped tub in Hollister does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Are you tired of looking at that scratched and stained basin in your bathroom? You can fix this situation without spending your entire life savings on a total demolition project.
Basically, you are looking at a chemical process that breathes new life into old materials. This service involves stripping away years of grime and applying a high-grade polymer coating that sticks like glue. Because we use specialized bonding agents, you get a brand new look that feels smooth to the touch. This means your old basin becomes a centerpiece of ease rather than an eyesore.
When you choose this path, you avoid the messy headache of removing heavy cast iron or fiberglass tubs. Most people find that the traditional way of tearing things out leads to huge bills and weeks of construction dust. By opting for this specialized surfacing, you save time and keep your home tidy. This lets you focus on other things while we do the heavy lifting in just a few hours.
Think of it like giving your old car a brand new paint job that lasts for years. The mixture we apply creates a hard shell that resists chips and keeps your bathroom looking sharp. Since we work right in your home within that small town in Tillman County, you do not need to worry about shipping anything away. Everything stays right where it belongs during the entire procedure.
Living in a place with a population of only 57 souls, you know that keeping expenses low is a smart move. With a median household income around $35,417, every dollar counts toward your family goals. This service offers a way to boost your property value without breaking the bank. You get a high-end look for a fraction of what a full remodel would cost.
Furthermore, you keep your old fixture which might be better built than the cheap plastic stuff sold today. Many older homes in the 73551 area feature sturdy basins that just need a little bit of love. By choosing to restore rather than replace, you keep waste out of the local landfill. This is a win for your wallet and a win for our planet.
Consider the aesthetic change as a way to improve your general sense of relaxation at home. A clean white surface makes the whole room feel bigger and brighter. Since you spend time in your bathroom every single day, you deserve a space that feels fresh. You will notice a major difference the moment you walk back into the room after the curing period.
While some folks think about buying a kit from the store, doing it yourself often leads to heartache. Professional grade coatings require a special spray gun and a steady hand to get that perfect mirror shine. If you mess up, you are left with a sticky, uneven mess that is hard to fix later. Our team brings the right gear so the finish stays smooth for years.
| Benefit | Why it helps you |
| Speed | We finish in one day |
| Cost | Way cheaper than replacing |
| Durability | Resists stains and soap scum |
| Safety | We use professional ventilation gear |
Moreover, we have the right chemistry to make sure the bond is permanent. A DIY kit might peel away in a few months because it lacks the proper primer. Our process includes deep cleaning and acid etching to ensure the new layer grabs hold tightly. This provides you with peace of mind knowing the job will stand the test of time.
You can also customize the color if you want a change from the standard white. Maybe you want a soft almond or a clean bone color to match your tiles. We can help you pick the right hue that fits your style. This small touch adds a layer of refinement that makes your bathroom look like it was designed by a pro.
Getting started is actually quite simple when you reach out for an estimate. We come out to your property to look at the current condition of your tub and provide a clear price. There is never any pressure to sign anything on the spot. You have the time to think about it and decide if the timing is right for your schedule.
Additionally, we explain every step so you know exactly what is happening to your bathroom. We show you the materials we use and tell you how to clean them afterward. Because we are a local outfit serving this part of Oklahoma, we care about our reputation in the neighborhood. You will find that our approach is honest, friendly, and focused on making you happy.
Think about how much you will enjoy showing off your bathroom to friends and family. A shiny, clean tub changes the whole vibe of the room instantly. It turns a place of utility into a zone of pure serenity and quiet enjoyment. You deserve to have a home that makes you feel proud and happy every time you step through the door.
When we arrive, we start by masking off the surrounding areas to protect your walls and floors. We know how much you value the rest of your home, so we are extremely careful. We then use a heavy-duty chemical cleaner to strip away soap scum, hard water deposits, and old caulk. This prep work is the most important part of the whole operation.
Next, we address any chips or cracks in the surface with a high-strength filler. This makes the surface level again so the new finish looks perfectly smooth. Once that dries, we sand everything down until it is uniform. This is where we create the perfect foundation for the new coating to grip onto.
Finally, we apply the high-performance finish using a specialized turbine sprayer. This creates a fine mist that settles into a rock-hard layer of brilliance. We use a ventilation system to keep the fumes moving out of your home while we work. This keeps the air quality good so you do not have to worry about strong smells lingering afterward.
You might wonder if the finish will hold up to daily use. The answer is yes, provided you use mild cleaners and avoid abrasive sponges. Because the surface is non-porous, dirt and mold have nowhere to hide. This means you spend much less time scrubbing on your hands and knees. You gain back your precious hours to do things you actually enjoy.
On top of that, you avoid the cost of hiring a plumber for a full removal. Plumbers are great, but they are not cheap when you have to disconnect pipes and remove old hardware. Our trade keeps the existing plumbing right where it is. You save on labor and materials while getting a result that looks brand new.
Furthermore, you keep the character of your home intact. Many older houses have a charm that disappears when you rip out original features. By keeping the tub and just changing the color or finish, you honor the history of your house while updating it for modern use. This balance of old and new is truly a great way to live.
Now is the perfect moment to see what we can do for your bathroom. You do not need to live with cracked surfaces or outdated colors any longer. Our team is ready to show you how a fresh finish can transform your space. You can get your free estimate by reaching out to us today. We look forward to meeting you and helping you improve your home.
Because we value your time, we work efficiently to minimize the disruption to your daily routine. You will be amazed at how quickly we turn a tired old fixture into something beautiful. This is the smartest way to upgrade your bathroom without the headache of a massive construction project. You are only one step away from the bathroom you have always wanted.
Everything we do is focused on your satisfaction. We want you to be so happy with our work that you tell all your neighbors about it. Since we are a local business, your recommendation is our most valuable asset. Contact us now to schedule your visit and see how affordable it is to refresh your home. You will be glad you did when you see the final result.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Hollister, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558