A dull or chipped tub in Huxley does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Your old tub probably looks like it survived a war zone with all those ugly stains and tiny scratches.
Instead of tearing out the whole bathroom and spending your life savings, you can actually breathe new life into that worn-out basin.
Our local team of surface restoration pros can make your existing fixture look brand new in just a few hours.
Naturally, you might worry about the crazy costs of a full remodel.
Which is why we offer a fast, affordable alternative that saves you thousands of dollars.
By choosing to restore the surface rather than replacing the whole heavy unit, you avoid dusty drywall destruction entirely.
This smart method seals up those nasty, hard-to-clean microscopic pores.
Consequently, you will spend way less time scrubbing on your hands and knees.
You get a sparkling, glossy finish that makes your entire washroom feel fresh and inviting again.
First, we meticulously clean the old porcelain or fiberglass to remove decades of soap scum and hard water deposits.
This critical step ensures our specialized bonding agents can grip the original material with absolute permanence.
If we skip this deep clean, the new coating simply will not stick correctly.
Next, we repair any deep chips, cracks, or rust spots that ruin the look of your basin.
This attention to detail means the final result looks completely smooth and uniform.
We then apply a high-tech primer that acts like superglue for the liquid acrylic topcoat.
Finally, our technicians spray several thin, even layers of a premium protective finish.
This advanced coating cures into a rock-hard shield that looks exactly like brand-new fired porcelain.
You get a brilliant, high-gloss shine that resists impact and chemical cleaners for years to come.
Think about the massive headache of hiring plumbers, tile setters, and trash haulers just for one tub.
That traditional route often leaves your home looking like a chaotic construction site for weeks.
Our on-site spray application keeps your home quiet and clean while delivering the exact same visual result.
On top of that, older cast iron fixtures actually hold heat much better than cheap modern plastic replacements.
By keeping your original heavy-duty basin, you get to enjoy longer, warmer baths.
This lets you preserve the character of your home while upgrading its overall cleanliness and appeal.
To help you compare your options, we put together a simple breakdown of how these two approaches match up:
| Project Factor | Our Specialized Coating Service | Full Demolition and Replacement |
|---|---|---|
| Total Project Time | Just 4 to 6 hours | Usually 3 to 7 days |
| Average Total Cost | Extremely budget-friendly | Very expensive with plumbing bills |
| Mess and Dust Level | Very minimal and contained | Massive drywall and tile debris |
| Durability | Excellent with proper care | Depends on the quality of new tub |
As you can see, saving the existing fixture is the obvious choice for smart homeowners.
Which means you keep your hard-earned money in your pocket where it belongs.
Plus, you get your bathroom back in service by the very next day.
Living in Story County means you appreciate honest, high-quality work that does not break the bank.
Whether you reside near the local schools or closer to the quiet outskirts of the 50124 zip code area, we come right to your doorstep.
We love helping our neighbors in this lovely community of 3,672 residents upgrade their properties without unnecessary stress.
Since the median household income here is around $90,393, local families know the true value of a dollar.
Spending five grand on a bathroom demolition just does not make financial sense when a beautiful alternative exists.
Our local service gives you that luxury feeling at a tiny fraction of the cost of retail store remodeling.
Indeed, we take great pride in delivering flawless results for every single home we visit in Iowa.
Our friendly crew treats your property with the utmost respect, sealing off the work area to protect your belongings.
We handle the tough work so you can simply relax and enjoy the transformation.
To ensure your newly coated surface lasts for a decade or more, you must avoid abrasive scrubbing powders.
Harsh chemicals like bleach or gritty cleansers can slowly dull the beautiful glossy sheen over time.
Instead, we recommend using mild dish soap and a soft microfiber cloth for effortless cleanup.
This simple maintenance routine keeps the acrylic barrier shining like a polished mirror.
Which means you never have to spend hours scrubbing away stubborn mildew stains again.
The non-porous surface naturally prevents grime from taking root in the first place.
Additionally, we suggest wiping down the surface after use to prevent mineral buildup from hard water.
This quick habit protects the integrity of the finish and keeps it looking spectacular.
With just a little basic care, your revived fixture will continue to impress guests for years.
Now is the perfect time to stop ignoring that embarrassing, outdated bathroom of yours.
You do not have to live with a stained, dingy basin that makes you cringe every time you walk by.
Our professional team is ready to deliver a fast, gorgeous solution that fits your budget perfectly.
We provide completely free, no-obligation quotes to help you plan your home improvement project.
We will assess your fixture, explain the process in detail, and give you an honest price with no hidden fees.
Contact us today to schedule your free estimate and take the first step toward a beautiful new bathroom!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Huxley, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558