A dull or chipped tub in Knightdale does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
That ugly, stained bathroom fixture in your home probably drives you crazy every single day.
Fortunately, you do not have to spend thousands of dollars on a messy, dusty demolition project just to make your bathroom look clean again.
By choosing a specialized resurfacing service, you can easily restore that glossy, bright finish on your existing cast iron or fiberglass tub without the headache of major construction.
Our dedicated crew loves transforming yellowed, chipped, and outdated surfaces into sparkling masterpieces that look brand new.
This budget-friendly option saves you a ton of cash while keeping heavy debris out of our local landfills.
We stand ready to visit your home and provide a completely free estimate so you can plan your budget with total peace of mind.
Imagine stepping into a bathroom that feels like a high-end spa instead of a dated relic from the past.
Achieving this transformation takes only a few hours of professional care rather than weeks of loud hammering and plumbing delays.
Our friendly local team makes the entire process incredibly simple and clean for you from start to finish.
Many homeowners confuse this specialized refinishing process with simply painting a surface, but it actually involves a highly technical, multi-step chemical bonding system.
First, we meticulously clean the old porcelain or acrylic to strip away decades of soap scum, body oils, and hard water deposits.
After that, we repair any deep scratches, rust spots, or chips with specialized fillers so the foundation is completely smooth.
Next, we apply a proprietary bonding agent that acts like a microscopic glue to fuse the old surface with the new material.
Following this crucial step, we spray several coats of a high-tech acrylic polymer coating using specialized high-volume, low-pressure equipment.
This meticulous application method ensures a perfectly flat, glass-like finish that resists peeling and looks incredibly shiny.
To help you understand how this smart cosmetic upgrade stacks up against a full remodel, we put together a quick comparison table:
| Feature | Our Restoration Process | Full Tub Replacement |
|---|---|---|
| Average Cost | Very affordable, usually saving up to 70% | Expensive due to plumbing and tile work |
| Time to Complete | Done in just 3 to 5 hours | Takes several days or even weeks |
| Mess and Dust | Minimal, with active ventilation used | Extremely high dust and heavy debris |
| Lifespan | 10 to 15 years with proper care | Decades, but at a massive upfront cost |
Choosing this smart alternative allows you to keep your high-quality original fixture, which is often much sturdier than modern plastic replacements.
On top of that, you avoid the risk of damaging your wall tiles, floor coverings, and expensive plumbing pipes during a demolition.
It is the ultimate way to achieve maximum visual impact with minimum household disruption.
We feel incredibly proud to serve homeowners throughout Wake County, where properties range from charming historic homes to beautiful new builds.
This lovely region, home to a growing population of 15,198 residents, features a thriving community where people truly appreciate smart, cost-effective home maintenance solutions.
With a comfortable median household income of $70,376, local families love finding ways to stretch their hard-earned dollars without sacrificing beauty or style in their living spaces.
Whether you live in a classic neighborhood or a newer development within the 27545 ZIP code of Knightdale, North Carolina, our mobile service van is always nearby.
We know the local water quality and how its mineral content can slowly dull your bathroom fixtures over time.
Because we live and work in this beautiful area, we treat your home with the exact same respect and care we would show to our own families.
By working with a local business, you get fast service and direct communication without dealing with corporate call centers.
We can easily pop over to your house, inspect your worn-out fixtures, and give you an honest appraisal of what it takes to make them shine again.
This neighborhood-focused approach ensures you receive top-tier craftsmanship and personalized service every single time.
Our journey begins with protecting your floors, vanity, and walls with heavy-duty drop cloths and protective plastic sheeting. We then use specialized, industrial-strength cleaners to dissolve every trace of old caulk, silicone, and soap scum from the target surface. This step is absolutely critical because even a tiny speck of grease can prevent the new coating from sticking properly.
If we find any rusted areas, particularly around the drain, we sand them down to bare metal and apply a rust-inhibiting primer.
We also fill any unsightly chips or deep scratches with a rapid-curing compound, sanding it flush so the surface feels perfectly uniform.
Your old fixture will look completely smooth before we even think about opening our spray equipment.
Once the surface is chemically clean and dry, we wipe on a highly specialized molecular bonding agent designed for porcelain and fiberglass. This chemical bridge ensures the new topcoat fuses permanently with the original substrate, preventing future peeling or bubbling. We also set up a powerful exhaust fan with a flexible duct to safely vent any paint fumes directly out of your nearest window.
After setting up our ventilation, we spray multiple layers of our premium, high-gloss acrylic polyurethane coating over the entire fixture.
This specialized material cures into an incredibly hard, durable finish that looks just like brand-new fired porcelain.
We apply several thin, even coats to prevent any runs or sags, leaving you with a flawless, mirror-like gloss.
The new surface needs a little bit of time to cure and chemically harden before you can turn on the tap. We typically ask you to wait about twenty-four hours before using the shower, which gives the coating plenty of time to fully set. Once cured, we return to remove our masking tape, clean up our work area, and apply a fresh bead of mildew-resistant silicone caulk around the edges.
This attention to detail ensures your bathroom looks incredibly neat and professional, with no messy caulk lines or overspray left behind.
We also take the time to explain how to care for your newly restored surface so it stays looking gorgeous for many years to come.
You will receive a beautiful, sparkling clean fixture that feels incredibly smooth to the touch, all without the massive mess of a remodel.
To keep your newly coated surface looking its absolute best, you should avoid using abrasive scouring powders or harsh scrubbing pads.
These rough tools can create microscopic scratches over time, which will eventually dull the beautiful glossy finish.
Instead, we highly recommend using mild, non-abrasive liquid soaps and a soft microfiber cloth or sponge for your weekly cleaning routine.
It is also a good idea to fix any leaky faucets quickly, as dripping water can cause mineral deposits to build up over time.
Never leave wet bottles of shampoo or heavy metal cans of shaving cream sitting directly on the ledge of your restored fixture.
Taking these simple precautions ensures your beautiful, restored surface remains bright, clean, and highly resistant to daily wear.
By following these easy guidelines, you can expect your restored fixture to look fantastic for a decade or even longer.
This minor change in your cleaning routine saves you from ever having to deal with the high costs of replacement again.
It is a small, sensible habit that keeps your bathroom looking like a luxury retreat with almost zero extra effort.
Ready to finally say goodbye to that ugly, hard-to-clean bathroom fixture without breaking your bank account?
We make it incredibly easy for you to get started by offering completely free, no-obligation quotes right at your doorstep.
Our friendly crew will take a look at your tub, explain your options, and give you a clear, upfront price with no hidden fees.
Stop putting up with an embarrassing bathroom that makes you feel uncomfortable whenever guests visit your home.
Let our local family-owned business bring back the sparkle, brightness, and cleanliness you deserve.
Contact us today to schedule your free home consultation and take the first step toward a beautiful, refreshed bathroom!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Knightdale, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558