A dull or chipped tub in Mexican Springs does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Looking to fix your ugly bathroom washbasin or deep soaking tub without spending thousands of dollars? You can get a totally free quote today from a local professional right here in your area!
Actually, those old heavy tubs take a absolute beating over the years. Constant water flow wears down the shiny top layer faster than you think! Sometimes you drop a heavy shampoo bottle and boom, you got a big ugly chip right in the bottom.
Honestly, nobody likes taking a bath in a tub that looks like a rusty old sink hole. Years of soap scum and hard water build up until the surface feels rough like sandpaper. Scrubbing it till your arms fall off just does not work anymore because the protective surface layer is totally gone!
So, you end up staring at stains that simply refuse to wash away. That hard finish was meant to protect the tub material underneath, but time always wins... Well, unless you do something smart about it right now!
Basically, this cool trade process involves applying a brand new hard outer layer over your existing fixture. It brings back that shiny brand new store feeling without ripping out your walls! Professionals call this specific coating a high tech polymer finish that sticks forever.
First off, the tech comes to your house and cleans everything with super strong stuff. Acid etching is often used to make tiny invisible grooves so the new liquid stick super good. You really need proper air fans blowing out the window because the chemicals smell crazy strong!
Then, they spray on a special bonding agent that acts like superglue for the final top coat. After that comes multiple layers of slick resin coat sprayed with a high pressure gun... It cures super hard into a smooth finish that looks incredibly clean!
Now, tearing out a heavy cast iron or porcelain tub costs a total fortune. Plumbers charge crazy money just to unhook two pipes under the floor! Plus you got to pay tile guys to fix all the broken wall pieces around the tub area.
Instead of throwing your savings down the drain, restoring the original surface keeps your hard earned dollars safe in your wallet. A total bathroom demo can easily run five thousand bucks or even more! Meanwhile, getting your basin recoated costs a tiny fraction of that huge price tag.
Besides that, you save so much time because the whole job takes just one day. You can literally use your shiny new looking tub by the very next evening! That means zero stress and no construction dust all over your bedroom furniture...
| Action Type | Time Needed | Mess Level | Wallet Impact |
|---|---|---|---|
| Full Replacement Demo | 1 to 2 Weeks | Dust Everywhere | Super Expensive |
| Professional Recoating Service | 1 Single Day | Very Low Mess | Super Affordable |
Living out in smaller high desert communities near zip code 87320 means you gotta be smart with your home maintenance budgets. With a small local population of around 455 folks, finding honest contractors who actually drive out to do great work can feel tricky sometimes! The local median household income means people around here value a good honest bargain over fancy over-priced city slicker nonsense.
Moreover, local water out here in this famous New Mexico region has tons of harsh minerals dissolved in it. That heavy mineral content eats away at old bathroom enamel faster than normal soft water would. My uncle once tried fixing his own rusty basin with a cheap box store paint kit... Man, that store bought paint started peeling off in giant ugly rubbery strips after just three baths!
Consequently, hiring a local expert who knows the exact water mineral issues in the area saves you major headaches. They bring real industrial grade coatings that hold up against tough mineral scale and daily family use. It pays to get it done right the first time by a real local human who knows what they are doing!
Fortunately, almost any standard fiberglass, acrylic, or cast iron fixture can get this awesome makeover treatment. Even those old vintage clawfoot tubs from back in the day turn out absolutely gorgeous! If your current fixture holds water without leaking underneath, it is a great candidate for a fresh top coat.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Mexican Springs, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558