A dull or chipped tub in Nahma does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably hate looking at that stained, chipped fixture in your bathroom every single morning. Fortunately, a highly skilled crew can come right to your home to spray a fresh, incredibly durable coating over your existing basin. This budget-friendly process breathes brand new life into your wash space without the massive mess of a full remodel.
Now, this smart alternative saves you thousands of dollars compared to tearing out walls. Because of this, you get to keep your classic cast iron or steel tub while making it look sparkling clean. Our team travels all over Delta County to help folks get that clean, glossy finish they deserve.
To begin with, ripping out an old tub is a literal nightmare that often damages your bathroom floor and plumbing. By choosing to apply a premium liquid coating instead, you avoid hiring expensive plumbers and drywall installers. This means the entire job takes only a few hours of quiet work.
Actually, the secret lies in our meticulous surface preparation which guarantees the new layer bonds forever. We carefully strip away old soap scum, repair deep chips, and roll on a specialized bonding agent. This process creates a smooth, glossy surface that resists scratches and looks incredibly beautiful.
On top of that, your wallet will thank you because this method costs a mere fraction of a traditional renovation. Since we do not have to haul away heavy debris, we pass those massive savings directly to you. You get a gorgeous, shiny wash basin without the stress of a dusty construction zone inside your home.
First, we mask off your entire bathroom with protective plastic sheeting to keep your home perfectly clean. This step ensures that no overspray or dust lands on your vanity, toilet, or walls. We also set up a powerful ventilation fan to pull all the fumes out through the nearest window.
Next, we use a specialized acid paste to etch the old porcelain or fiberglass surface. Which means we create microscopic pores so the new coating can grab hold with a super tight grip. If you have any cracks or rusty spots, we fill them with a waterproof polyester putty at this stage.
After that, we spray several coats of a high-tech acrylic urethane using a professional spray gun. This leaves a deep, luxurious shine that looks exactly like brand new porcelain from the showroom. Once it cures for a day, you can jump right in and enjoy a relaxing soak.
| Project Factor | Our Professional Coating Service | Full Bathroom Demolition |
|---|---|---|
| Average Cost | Very affordable and budget-friendly | Extremely expensive with hidden fees |
| Time to Complete | Finished in less than one day | Takes several days or even weeks |
| Mess and Dust | Virtually none due to plastic masking | Incredibly messy with tons of plaster dust |
| Lifespan | Lasts up to ten years with proper care | Lasts decades but costs a fortune |
As you can see, choosing a local specialist to restore your surface makes the most sense. This table highlights how you save time, money, and your sanity by opting for our advanced spray-on system. One written quote, no pressure, and the work only starts when you say so.
Living in a quiet, beautiful area like our little town of 495 residents means we appreciate classic craftsmanship. Many homes in ZIP code 49864 feature gorgeous, heavy cast iron tubs that are worth saving. Instead of throwing away historic charm, you can preserve the original character of your cozy home.
Indeed, our local median household income goes a lot further when we make smart, sensible home improvement choices. You do not need to spend your savings on a massive contractor crew when we can fix your fixture in an afternoon. Our friendly technicians treat your property with the utmost respect and care.
Consequently, we understand the unique needs of homeowners in this beautiful pocket of Michigan. Whether you own a historic farmhouse or a modern cabin, we bring top-tier equipment right to your doorstep. We take great pride in helping our neighbors update their spaces affordably.
To keep your glossy surface looking fabulous, you must avoid harsh abrasive cleaners like bleach or scrubbing powders. Instead, use mild dish soap and a soft sponge to wipe down the basin after each use. This simple habit prevents soap scum buildup and keeps the shine alive for years.
Additionally, you should never leave wet shampoo bottles or heavy metal cans sitting directly on the ledge. Over time, trapped moisture can weaken the bond and cause premature peeling around the edges. A hanging shower caddy is a fantastic way to protect your investment.
Finally, remember to fix any leaky faucets as soon as possible to prevent constant water dripping. Continuous dripping can wear down even the toughest industrial coatings over several years. Taking care of your upgraded fixture is incredibly easy when you follow these basic tips.
Perhaps you are wondering about the exact cost to restore the shine in your own bathroom. We offer completely free, no-obligation quotes where we inspect your tub and explain the entire process. This lets you make an informed decision without any high-pressure sales tactics.
So, why spend another day looking at an embarrassing, stained bathroom fixture? Our team is ready to drive out to your home and deliver a flawless, glassy finish you will love. Grab your phone or send us a message right now to schedule your free home consultation.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Nahma, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558