A dull or chipped tub in Rutherford College does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Maybe you look at your chipped, yellowing wash basin every morning and wish for a change. Replacing that heavy porcelain basin creates a giant mess and costs you a small fortune in labor.
Fortunately, you can transform the entire look of your room for a fraction of the cost. A professional team arrives at your house to apply a specialized liquid coating that makes old surfaces look brand new again.
Think about the sheer amount of work required to tear out an old cast-iron fixture from your home. You deal with dusty debris, plumbing headaches, and several days of construction noise in your quiet house.
Instead, a skilled technician arrives, cleans the surface thoroughly, and repairs any small cracks or rust spots. This process leaves you with a smooth, glossy finish that feels like a dream to touch every single day.
Consider that the median household income in this specific neck of the woods is around $43,226. Spending thousands of dollars on a full bathroom gut job might not fit into your budget right now.
Our method provides you with a high-quality result that mimics the feeling of a brand-new fixture. You keep more money in your bank account while still enjoying a stunning, updated space in your home.
Beyond just saving you cash, choosing this route keeps bulky construction waste out of the local landfills. Old iron or fiberglass fixtures are heavy and difficult to recycle properly.
By deciding to breathe new life into what you already own, you are making a greener choice for the planet. You get to feel good about your decision while your bathroom gains a sense of refined style.
First, we arrive at your property in Rutherford College, North Carolina to inspect the current state of your fixtures. We check for hidden damage that might need a little extra attention before we start the coating application.
Next, we mask off the surrounding tiles and walls to keep your home perfectly clean and protected. This step ensures that no stray drops land anywhere except where we want them to go.
| Stage of Work | What Happens | Your Benefit | |
|---|---|---|---|
| Preparation | Cleaning and etching the old surface | Better grip for the new layer | |
| Repair | Fixing chips or deep scratches | A smooth surface that hides past damage | |
| Application | Spraying the bonding agents and finish | A durable, high-gloss appearance | |
| Curing | Letting the new layer harden | A long-lasting finish for daily use |
What makes this work so well is the advanced polymer technology that creates a permanent chemical bond. Unlike a simple coat of paint, this material fuses with the existing surface to form a hard, non-porous shell.
You will notice that the surface becomes incredibly easy to wipe down and maintain. Dirt and grime have nowhere to hide on that slick, glossy finish, which saves you cleaning time every week.
Life in a community with a population of about 1,253 people often means you prefer reliable work from neighbors you can trust. Being part of the 28671 zip code area, you likely value honesty and straightforward communication.
We know that you do not want to deal with giant, faceless companies that treat you like just another number. When you choose a local partner, you get personalized service that truly cares about the quality of the finish.
Some people worry that a spray-on surface will not stand up to the rigors of everyday family life. However, modern polymers are designed to withstand soap, hot water, and constant scrubbing without peeling or flaking off.
You can rest easy knowing that your investment remains solid for many years to come. This provides a level of peace of mind that allows you to enjoy your home without constantly worrying about maintenance.
If you are tired of looking at stained, dated colors, there is really no reason to wait any longer. You deserve to walk into a bathroom that brings you a sense of pure delight every single morning.
Contacting a professional for a free estimate is the most logical way to get the ball rolling. We come out to your site, look at the project, and give you an honest price without any hidden surprises.
During our visit, we explain exactly what we can achieve with your specific type of tub or sink. We look at the material, the extent of the damage, and the color you want to achieve for your space.
You get a clear breakdown of the costs and the timeline, so you know exactly what to expect from start to finish. There is never any pressure to commit until you are completely ready to move forward.
Many folks ask us if they can change the color from a dated almond to a bright, modern white. The answer is a resounding yes because the coating process allows for almost any color change you desire.
You can also ask us about adding a non-slip texture to the bottom of the basin for extra safety. This simple addition makes the space safer for your children or elderly family members who use the room.
You might have seen those cheap kits at the big box stores that promise easy results for under a hundred dollars. Unfortunately, these products rarely provide the lasting finish that a professional-grade application achieves.
Most homeowners find that those kits start peeling within a few months because they lack proper bonding chemicals. You end up having to scrape it all off and pay a pro to fix the mess anyway.
Our specialized equipment allows us to apply the coating with a level of precision that a paintbrush or roller cannot match. We use high-pressure sprayers to ensure an even, flawless finish that looks like it came from the factory.
This technical advantage provides you with a result that looks sophisticated and clean for much longer. You save yourself the frustration of a failed project and the cost of buying materials twice.
Think about how much more enjoyable your morning routine will be with a sparkling, clean fixture. You will no longer feel embarrassed if a guest happens to use your bathroom during a visit.
Updating your home is one of the best ways to improve your daily quality of life in Burke County. You gain a beautiful space that makes your residence feel more updated and cared for.
Waiting until the surface starts leaking or rusting through makes the repair process significantly more complicated and expensive. It is always better to address surface wear before it turns into a structural issue for your floor.
Taking action now saves you from potential water damage repairs that cost way more than a simple cosmetic refresh. You keep your home in top shape by being proactive with your maintenance schedule.
You just need to reach out and schedule a time for us to swing by your property. We are always happy to help our friends in the 28671 area achieve their home improvement goals.
Requesting a free estimate is the best way to see the potential of your current bathroom setup. You will be surprised at how affordable it is to get that fresh, like-new look you have been dreaming about.
Imagine walking into your bathroom and seeing a surface that shines under the lights. You will wonder why you waited so long to make such a simple yet impactful change to your home.
We are ready to guide you through the process and answer every single question you might have. Let us help you transform your space into a place that truly makes you happy every single day.
You have the power to change your environment without breaking your budget or your back. Making a smart, informed decision about your fixtures adds value and joy to your living space.
Reach out today for your free quote and see how we can help you refresh your home. You deserve a beautiful space that stands the test of time and leaves you feeling proud of your choices.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Rutherford College, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558