A dull or chipped tub in Sanborn does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably stare at that stained, chipped, or peeling basin in your bathroom every single morning while brushing your teeth. Maybe you feel like your bathroom needs a massive makeover but the thought of tearing everything out just sounds like a total nightmare.
Fortunately, there is a way to make that old, ugly tub look brand new without spending a fortune or living in a construction zone for weeks. By choosing a professional resurfacing process, you get a fresh, smooth finish that saves you tons of money compared to a full replacement.
Basically, this service involves spraying a high-quality, durable resin coating over your existing tub or shower stall. Think of it as giving your fixture a thick, protective skin that hides all the years of wear and tear beneath it.
Because we use industrial-grade polymers, this layer bonds tightly to the original surface to ensure it stays put for years. This means you get a bright, glossy, and easy-to-clean tub that looks like it came straight out of a fancy magazine catalog.
Living here in O'Brien County means you appreciate folks who show up on time and do quality work. When you hire someone from the local area, you know they care about their reputation among the 1,452 neighbors in this community.
Since this town has specific needs, working with a local contractor makes the entire process smoother and much faster. You gain peace of mind knowing that help is nearby if you ever have a question about your freshly updated bathroom.
Replacing a tub usually requires ripping out walls, dealing with heavy plumbing, and waiting for messy contractors for days on end. Conversely, this specialized resurfacing method usually takes just one day from start to finish.
This lets you use your bathroom again almost immediately once the surface has cured properly. Plus, you keep the original structural integrity of your home intact while giving your space a much-needed lift in visual appeal.
Often, people think that new is always better, but that is rarely true when it comes to older fixtures. Many of these vintage tubs are made with heavy-duty cast iron that lasts forever if you just treat the surface right.
By paying for a professional touch-up, you save thousands of dollars that you can put toward other home improvements. This is a smart move for households in our area where the median income is around $53,934.
| Benefit Category | Why It Matters | |
|---|---|---|
| Cost Efficiency | Saves you thousands compared to total remodeling | |
| Time Savings | Finished in one day, not weeks of mess | |
| Durability | Modern coatings resist chips and stains better | |
| Value | Increases the resale potential of your home |
Whether your tub is yellow, pink, or just plain scratched up, we have the tools to fix it. We start by cleaning everything with strong chemicals to remove soap scum, calcium buildup, and old grime.
After that, we mask off the surrounding walls and floors to protect your home from any overspray. This attention to detail guarantees that only the tub gets the fresh, beautiful treatment it deserves.
The real magic happens during the application phase where we use specialized spray equipment to lay down a smooth coat. This creates an atmosphere of total satisfaction because the result looks perfectly uniform and pristine.
Because we pay close attention to ventilation and curing times, your new surface will resist peeling or bubbling. You get a result that feels just as good as the day the tub was originally installed.
Maybe you have a small chip in the porcelain that drives you crazy every time you look at it. We fill those cracks and smooth them out so they disappear entirely before we even start the final coating process.
On top of that, we can change the color of your fixture entirely if you are tired of that old 1970s almond shade. You can choose a bright, clean white that makes your whole room feel much larger and more modern.
Think about all the stress you avoid by not dealing with plumbers or tile setters in your house. Since we are a local business serving the 51248 area, we treat your home like our own.
You deserve to relax in a clean, beautiful environment without breaking the bank or sacrificing your weekend. When you choose this path, you get the absolute best of both worlds for your daily needs.
Now, you might wonder what you need to do to prepare for us to arrive. All we ask is that you remove your personal items like shampoo bottles, loofahs, and toys from the work area.
Everything else is taken care of by our team, including the deep scrubbing and the final cleanup. You just come home to a tub that looks like a high-end luxury upgrade for your residence.
If you are still on the fence, consider how much you value your time and your hard-earned money. There is simply no better way to transform the look of your bathroom for such a low investment.
Because we are dedicated to our neighbors in this beautiful part of Iowa, we offer a free estimate for every inquiry. You never have to commit to anything until you have all the facts in front of you.
You are just one click away from getting that fresh, shiny bathroom you have been dreaming about for so long. Stop living with that peeling, stained, or outdated fixture and let us give it a new lease on life.
Simply reach out to us today to request your free quote for our services. We will come out, look at your specific situation, and give you an honest price that fits your budget perfectly.
Our team is always ready to answer your questions and help you decide on the right finish for your home. You will be amazed at how different your space looks once the work is complete.
Why wait another day to start enjoying a better bathroom experience? Get in touch with us right now and let us show you how we can turn your old, tired fixtures into the highlight of your house.
Maybe you have heard horror stories about DIY kits that peel off after a few months. That is exactly why you should stay away from those store-bought sprays and trust the professionals who have the right equipment.
We use advanced resins that are meant for high-traffic areas and constant moisture exposure. This means you do not have to worry about your hard work going down the drain.
We pride ourselves on doing the job right the first time so you can enjoy your home. Your satisfaction is our primary goal during every single visit we make to your property.
If you have any specific requests or concerns about the color or texture, just let us know. We want the finished product to match your vision perfectly.
We believe in being direct and helpful, which is why we never use pushy sales tactics. You deserve to make an informed decision without feeling pressured into something you do not want.
Our estimates are always free, transparent, and easy to understand for everyone. You get a clear picture of what we will do and how much it will cost before we start.
Giving your home a lift does not have to be a complicated or expensive ordeal. By focusing on renewing what you already have, you save time, money, and a lot of unnecessary headaches.
We are proud to serve the people of this region with honesty and hard work. Let us help you fall in love with your bathroom all over again with a professional finish that really lasts.
Now is the perfect time to reach out and see what we can do for your unique space. We are excited to hear from you and provide you with a detailed estimate.
There is nothing quite like the feeling of stepping into a clean, bright, and refreshed room at the end of a long day. You truly deserve this upgrade for your house.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Sanborn, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558