A dull or chipped tub in Sebille Manor does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Maybe you look at your old tub and feel a little sad every morning.
Thankfully, you do not have to spend thousands of dollars on a messy demolition project.
Our local crew can make that worn-out surface look incredibly shiny and brand new again in just one day.
Because let us be honest, nobody wants to look at ugly stains while trying to relax.
Actually, we see this exact problem all the time in our neighborhood.
This is why we specialize in restoring what you already have to save you time and cash.
Now, you might wonder how this magic trick actually works.
Well, we basically apply a super durable, glossy new skin right over your existing fixture.
This special process stops leaks, covers up chips, and brings back that clean feeling you miss.
Instead of ripping out your entire plumbing setup, we use specialized chemicals to bond a new layer of coating.
Which means we clean the old surface, repair any cracks, and spray a high-tech finish.
You get a gorgeous, easy-to-clean basin without the headache of a massive remodel.
Believe it or not, the results look identical to a brand new porcelain installation.
On top of that, the whole project takes less than a single afternoon to complete.
We always make sure our neighbors get the best results without any unnecessary stress.
To help you understand the difference between replacing and restoring, we created a handy comparison.
This table shows how much hassle you can avoid by choosing our smart restoration route.
You will quickly see why so many homeowners in this part of Michigan choose this path.
| Feature | Full Replacement | Our Restoration Service |
|---|---|---|
| Total Cost | Very high due to labor and tiling | Extremely affordable and budget-friendly |
| Time Required | Usually 3 to 7 days of loud mess | Finished in just a few hours |
| Debris and Dust | Heavy construction waste in your home | Virtually zero mess left behind |
Obviously, saving money is the biggest benefit for most families around here.
With the median household income in Macomb County hovering around seventy-six thousand dollars, everyone appreciates smart spending.
You can keep your hard-earned cash for other fun activities instead of throwing it into plumbing bills.
Another great thing is that we preserve the vintage character of older homes.
Some of the classic cast iron fixtures built decades ago are actually much stronger than modern cheap plastic replacements.
By keeping your original piece, you maintain that heavy-duty quality while enjoying a spotless surface.
Naturally, our team respects your living space and keeps things extremely tidy.
We set up professional exhaust fans to pull any paint fumes right out of your window.
This keeps your indoor air clean and your family happy while we work our magic.
First, we scrub the old surface with industrial-strength cleaners to remove decades of soap scum.
After that, we fill in any deep scratches or rusty spots with a tough waterproof filler.
This step is crucial because the new coating needs a perfectly flat foundation to stick to.
Next, we apply a special molecular bonding agent that acts like superglue for the new glaze.
Then, we carefully spray several layers of our topcoat to create a deep, luxurious shine.
The end result is a highly durable shield that resists scratches and looks amazing.
As a neighborly crew working right here in Macomb County, we know the local housing styles inside and out.
Whether you live in a cozy ranch or a newer colonial, we treat your home like our own.
Our local presence means we can arrive quickly and finish the job without any annoying delays.
Serving the community of 43,381 residents gives us a real sense of pride in our daily work.
We cover the entire local area, including the popular ZIP code zones like 48035, 48036, and 48038.
So, if you are located anywhere near Sebille Manor, Michigan, we are just a quick call away.
For your peace of mind, we only use the highest grade materials available in our industry.
We do not cut corners or use cheap DIY kits that peel off after three months.
Our commercial-grade coatings are designed to stand up to daily hot showers for years to come.
To keep that brilliant shine looking fresh, you just need to avoid harsh abrasive cleaners.
Simple dish soap and a soft sponge will work wonders without scratching the new finish.
This easy maintenance routine ensures your investment looks pristine for a very long time.
Also, remember to fix any dripping faucets as soon as you notice them.
Constant water dripping in one spot can eventually wear down even the strongest industrial coatings.
A little bit of basic care goes a long way in protecting your beautiful bathroom upgrade.
If you are tired of looking at that dingy, stained basin, we are here to help you out.
We would love to visit your home and give you a completely free, no-obligation estimate.
This way, you can see exactly how affordable it is to get the beautiful bathroom you deserve.
Our friendly team will explain the entire process and answer any questions you might have.
We believe in honest pricing, clear communication, and delivering top-tier craftsmanship every single time.
There are absolutely no hidden fees or surprise costs when you work with us.
Please do not wait another day to start enjoying your home to the absolute fullest.
Contact us right now to book your free consultation and take the first step toward a gorgeous bathroom.
We look forward to meeting you and making your old fixtures shine bright once again!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Sebille Manor, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558