A dull or chipped tub in Wellford does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You look at that stained, chipped porcelain daily and wonder if a total bathroom remodel is your only option.
Actually, we have a much better and cheaper way to make your bathing fixture look brand new again in just a few hours.
By hiring our local team, you get a beautiful, shiny finish without the mess of demolition.
Which means you save thousands of dollars that would otherwise go toward expensive plumbing work and new tiling.
Naturally, we want to help you make the best choice for your home, so we offer a completely free estimate on-site.
Requesting your free quote today takes only a minute and starts your journey toward a gorgeous bathroom.
Many homeowners think their dull, faded basins are completely ruined after years of scrubbing with harsh chemicals.
Honestly, the protective factory glaze simply wears down over time, leaving the porous material underneath exposed to dirt.
This is where our specialized chemical bonding and resurfacing process comes in to save the day.
First, we meticulously clean the surface using industrial-strength agents to strip away old soap scum and mineral deposits.
After that, we repair any deep scratches, rust spots, or ugly chips with a durable filler compound.
This prep work ensures the new coating sticks perfectly and stays smooth for many years to come.
Next, we apply a high-tech bonding agent that acts like a super-glue between the old porcelain and the new finish.
Then, our technicians spray several layers of a premium acrylic polymer coating using specialized high-volume, low-pressure equipment.
This meticulous application creates a glorious, high-gloss shine that looks exactly like a brand-new fixture from the store.
If you choose to tear out your old cast iron or steel tub, you face a huge headache.
For starters, contractors often have to break the old unit into pieces just to get it through your bathroom door.
On top of that, you will likely need to replace the surrounding wall tiles and hire an expensive plumber.
Our fast, on-site service completely bypasses all that costly chaos and gets your bathroom back in service quickly.
Usually, the entire project takes less than a single day from start to finish, which keeps your routine normal.
This table below shows how the two options stack up against each other so you can see the real benefits.
| Feature | Our Resurfacing Service | Full Replacement Demolition |
|---|---|---|
| Project Duration | 4 to 6 hours | 3 to 7 days of messy work |
| Average Cost | Very budget-friendly | Extremely expensive |
| Mess and Dust | Virtually none | Plaster, drywall, and tile dust everywhere |
| Plumbing Changes | No modifications needed | Often requires new pipes and drains |
Consequently, you get to keep your high-quality, heavy-duty original tub while enjoying a modern, clean look.
We love helping local homeowners get that fresh feel without emptying their savings accounts.
Click our quote button now to book your free estimate and see how cheap luxury can really be.
We take pride in serving our wonderful community in Spartanburg County, which is home to about 2,561 friendly residents.
Since the median household income in this lovely area sits around $46,304, we know how important it is to spend wisely.
Our affordable services are designed to give you maximum value without sacrificing a single drop of quality.
Whether you live in the ZIP code 29385 area or nearby, we travel directly to your doorstep with our mobile workshop.
Because we are local, we understand the common water issues and home styles in this beautiful part of South Carolina.
We treat your home with the utmost respect, sealing off the work area and using advanced exhaust fans to vent fumes safely.
This attention to detail means you will not have to worry about overspray, weird odors, or messy cleanup.
Once we pack up our tools, your bathroom will be clean, tidy, and ready for you to admire.
You can trust our crew to deliver a beautiful finish that brings back the cozy comfort of a clean bath.
To keep your sparkling surface looking pristine, you only need to make a few simple changes to your cleaning routine.
First, throw away those abrasive scrubbing powders and steel wool pads that scratch up shiny finishes.
Instead, use mild liquid dish soaps or gentle foaming cleansers along with a soft microfiber cloth.
This easy maintenance routine prevents micro-scratches and keeps the protective outer layer shining bright for up to a decade.
Additionally, we recommend wiping down the surface after each use to prevent soap film from building up.
By following these basic tips, your investment stays protected and looks amazing for a very long time.
Sometimes, homeowners ask us about using bath mats with suction cups on the bottom of their newly coated basins.
Actually, those suction cups can pull on the new finish and damage it over time, so we advise against them.
We can easily apply a built-in, slip-resistant surface to the bottom of your tub during our process for extra safety.
You do not have to live with an ugly, stained, or hard-to-clean washing space for another single day.
Our skilled technicians have the tools, the premium coatings, and the local pride to do the job right the first time.
We make sure every homeowner we visit gets an honest assessment and a fair price without any hidden fees.
Which is why we encourage you to take advantage of our completely free, no-obligation home consultations.
We will examine your fixture, explain the entire process in plain English, and provide an accurate price on the spot.
This lets you make an informed decision without feeling any high-pressure sales tactics from us.
Ready to finally fall in love with your bathroom again while keeping your hard-earned money in your pocket?
Simply give us a shout to schedule your free, friendly home estimate.
We look forward to meeting you and giving your old tub a spectacular second life that you will proud of!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Wellford, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558