A dull or chipped tub in West Pelzer does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Are you tired of looking at that stained, chipped, or outdated basin in your bathroom? You can actually transform the entire look of your room without tearing everything out and spending a fortune on a full renovation.
This process involves applying a high-grade, durable chemical coating to your existing unit to make it look brand new again. Because you get to choose the color and finish, your bathroom will finally match your personal vision of aesthetic serenity.
Replacing a solid, heavy-duty tub from decades ago often means dealing with demolition dust, broken tiles, and weeks of construction work in your home. By choosing to restore the surface, you save yourself the headache of a total bathroom overhaul.
Since your current unit is likely made of sturdy cast iron or steel, it is often much better quality than the cheap, thin plastic versions sold in stores today. Keeping your original fixture means you maintain that structural integrity while getting a fresh, glossy finish that feels wonderful to the touch.
On top of that, the cost of this specialized resurfacing is usually just a fraction of what a plumber and a general contractor would charge you for a complete demolition. You keep your hard-earned money in your pocket while still enjoying a space that looks like it belongs in a high-end magazine.
First, our team arrives at your location in this charming Anderson County town to inspect the current condition of your unit. We look for any cracks, rust, or deep scratches that might need extra attention before we start the application process.
Then, we perform a deep cleaning to strip away layers of soap scum, lime, and old grime that have built up over years of use. This step is vital because the new chemical finish needs a perfectly clean surface to bond properly so it lasts for many years to come.
Afterward, we carefully mask off the surrounding tiles and fixtures to ensure that our specialized materials only touch the target area. This precision work is what gives the final result such a high level of polished refinement and keeps your bathroom looking pristine.
| Step of the process | Benefit to you | |
|---|---|---|
| Deep chemical cleaning | Ensures a long-lasting bond | |
| Repairing minor cracks | Prevents future water damage | |
| Applying the new coating | Gives you a factory-fresh finish | |
| Curing the finish | Provides a hard and durable surface |
Living in a place like the one around ZIP code 29669 often means you appreciate the historic charm of your house. Many homes in this area were built with quality materials that simply do not exist in modern construction anymore.
Restoring your antique clawfoot or standard built-in model helps you preserve the authentic character of your home while updating the function. You get to keep that old-school charm without living with the eyesore of worn-out, yellowing, or peeling surfaces.
Furthermore, this is an excellent way to prepare your home if you are thinking about putting it on the market. Potential buyers love seeing a bathroom that looks clean, bright, and well-maintained, and it might just help you get a better offer when the time comes.
Many folks wonder if the new finish will peel off like a cheap sticker after a few months. Honestly, when you hire someone who uses professional-grade resins and understands the chemistry of adhesion, the result is incredibly tough and resistant to normal wear.
Another thing you might worry about is the smell during the application process. We use ventilation equipment to keep the air moving, and while there is a temporary odor, it fades quickly as the chemical layers cure and harden into their final state.
Lastly, you might ask how long the whole job takes to complete from start to finish. Typically, a standard project takes about one day, which means you get your bathroom back in working order almost immediately after we finish our work.
Beyond just making it white again, you have the freedom to select from a variety of shades that fit your style. Perhaps you want a crisp, bright white that makes the whole room feel larger and more open.
Alternatively, you could go with a subtle almond or a soft gray to give the room a more modern and moody vibe. This ability to tailor the finish to your existing tiles or wall colors allows you to achieve a sense of visual harmony throughout the bathroom.
This is a fantastic way to experiment with design without making any permanent, expensive changes to your plumbing. If you ever feel like changing the mood again, you are not stuck with the same heavy, dated fixture you started with.
Once we finish the application, you simply need to avoid harsh, abrasive cleaning products that could scratch the surface. A soft cloth and mild, non-abrasive soap are all you really need to keep that glossy shine looking great for years.
Because the surface is non-porous, it actually resists mold and mildew much better than the original, aging enamel did. You spend less time scrubbing your tub and more time enjoying a nice, relaxing soak at the end of a long day.
Also, try to avoid letting metal objects like heavy shampoo bottles or razors sit in standing water on the edges for long periods. Small habits like rinsing the unit after each use will go a long way in protecting your investment for a very long time.
Serving a population of around 821 people means we treat every single project like it is in our own family member's home. We know that in a town with a median household income of around $33,906, every dollar you spend needs to count toward real value.
We take immense pride in our work and never cut corners just to get to the next job faster. When you see the final shine, you will understand why our neighbors trust us to handle their most important bathroom updates.
You get a level of dedicated service that you just cannot find with those giant, impersonal national chains. We are your neighbors, we are here to help, and we stand by the quality of the work we leave behind in your home.
If you are ready to see that dull, chipped basin look vibrant and smooth again, the next step is simple. We provide a complimentary assessment where we come out, look at your specific unit, and give you a clear, honest price for the work.
There is no pressure to buy anything, and we give you all the information you need to make the best choice for your house. You deserve a bathroom that feels fresh and inviting, so why keep waiting for a renovation budget that might never arrive?
Reach out to us today to schedule your visit and find out exactly how much we can save you on your next project. We look forward to working with you to make your home the most comfortable space it can be.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around West Pelzer, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558