A dull or chipped tub in Austin does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Are you tired of looking at that scratched and stained basin in your washroom? You can transform your outdated space into a gleaming sanctuary without spending a fortune on a total gut job.
Replacing a standard porcelain or fiberglass basin sounds like a simple project until you actually start the work. First, you have to tear out the old tile walls and hope you do not damage the plumbing behind them. Then, you have to drag a heavy, awkward hunk of metal or plastic through your narrow hallways. This process creates mountains of dust that will linger in your vents for weeks. Plus, you will have to pay for a plumber to disconnect and reconnect everything properly. It turns into a week-long ordeal that leaves your home looking like a disaster zone.
Instead of demolition, you can choose a specialized surface renewal process that brings your fixture back to its original shine. This method involves applying a highly durable chemical coating that bonds directly to the existing substrate of your basin. Because the technician works right there in your home, you avoid the cost of disposal fees and heavy labor. You get a brand-new looking surface that feels smooth and looks bright white in just a single day. This saves you so much time and keeps your daily routine from being totally wrecked.
Once you decide to upgrade your space, you might wonder how this process actually works on older materials. The technician starts by cleaning the area thoroughly to remove all soap scum and mineral deposits. Then, they use a special acid etching solution to make the surface porous so the new material grips tightly. This chemical bond ensures that the finish stays put for many years without peeling or bubbling up. You end up with a high-gloss finish that mimics the luxury of a brand-new install.
When you choose this service, you get a surface that is much easier to keep clean than the old, porous one you had before. Dirt and grime simply slide off the non-porous layer, which means you spend less time scrubbing on your hands and knees. This adds a level of ease to your chores that you will appreciate every single morning. Because the finish is so hard, it also resists the usual chips and cracks that happen over time. Your bathroom will finally feel like a place of relaxation again.
The materials used in this trade are industrial-grade polymers that dry into a rock-hard layer. These coatings are specifically engineered to handle the constant expansion and contraction that happens with hot water. Since you live in a place like the region within Travis County, the heat outside can sometimes make your home environment shift. This high-quality synthetic finish stays flexible enough to survive those changes without cracking under pressure. It provides a level of coziness to your bathroom that you just cannot get with old, worn-out surfaces.
Living in a place with a population nearing one million means that home prices are always moving. Many folks here in the heart of Texas want to keep their property values up without massive renovation expenses. With a median household income hovering around the sixty-seven thousand dollar mark, every dollar you spend needs to count. This cost-effective solution lets you allocate your hard-earned money toward other important home improvements or savings. It is the smartest way to get that high-end look on a budget.
Whether you reside near the 78701 zip code or out toward the edges of the city, finding a reliable contractor is your first step. You should look for someone who has a reputation for keeping the job site clean and smelling decent. Since the chemicals used are quite strong, proper ventilation is a requirement that you should discuss upfront. A good technician will use high-powered exhaust fans to pull those fumes right out of your window. This keeps your home air safe and manageable while they work their magic.
This organized approach guarantees that your bathroom remains protected while the surface receives its fresh new look. You will notice the difference the moment the tape comes off the walls.
Getting started is quite simple when you know the right people to call. You should always invite a professional to your home to take a look at the specific condition of your fixture. They can tell you if there are deep rust spots or structural cracks that might need extra prep work. Getting a free estimate is the best way to understand exactly what you are paying for before any work begins. You never have to worry about hidden fees or surprise costs when you get it all in writing.
During the consultation, the pro will check the drain assembly and the faucet to ensure they are in good shape. If your drain is corroded, they might suggest replacing it at the same time to ensure a perfect seal. This prevents water from getting under the new finish and causing future problems. By addressing these small details early, you ensure the longevity of your investment for many years. It is a proactive way to handle your home maintenance without any stress.
Once the work is complete, you should avoid using abrasive cleaners that could scratch the new finish. Stick to mild dish soap or products specifically designed for delicate surfaces. Keeping the area dry after you use the shower also helps the longevity of the coating. You will find that cleaning becomes so much faster once you stop fighting against those deep, permanent stains. A quick wipe down is usually all you need to keep things looking pristine and bright.
Waiting until your fixture is totally unusable often makes the repairs much harder and more expensive to complete. When you see small chips forming, that is the perfect time to call for a free quote. Dealing with the issue early prevents rust from spreading underneath the surface, which is much harder to fix later. You deserve to enjoy your home, and starting this process is the quickest way to improve your environment. Imagine walking into a bathroom that looks completely new every single day.
Even if you do not plan on selling your house soon, maintaining a nice space is important for your own happiness. Potential buyers love to see a bathroom that looks clean and updated rather than one with stained, yellowing fixtures. It suggests that you take good care of your property, which makes a big impression on anyone who enters. You are not just paying for a quick fix, you are investing in the long-term status of your house. It is a win-win situation for your bank account and your mood.
If you are ready to stop staring at that ugly basin, you should reach out to a local professional right now. They can walk you through the color options and answer all your questions about the process. Many people choose a classic bright white, but there are other shades if you want a different look. Getting your free estimate is the final step toward finishing that lingering item on your home to-do list. Do not let another month go by while you settle for a bathroom that makes you feel frustrated. Take the leap and transform your home today with a simple, effective, and affordable service that changes everything.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Austin, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558