In Eastborough, the Wichita technician we send repairs, sprays and caulks your tub where it stands.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably look at that scratched or dull tub and feel like it belongs in a museum of bad decor. Instead of ripping everything out, you can get a fresh look without the massive mess or high costs of a full remodel.
This process gives you a sparkling finish that feels brand new and improves the overall appeal of your private sanctuary. By choosing to restore rather than replace, you save a significant amount of money and time while keeping your home functional.
Basically, this work involves applying a high-grade chemical coating to your existing porcelain or fiberglass basin to hide years of wear. Because the coating bonds directly to the material, it creates a tough, non-porous shield that is very easy to wipe down.
Since you are dealing with an old fixture, these technicians use special primers to ensure the new layer sticks for a long time. This means you do not have to worry about peeling or flaking after just a few months of normal usage.
On top of that, the chemical process fills in those annoying chips and cracks that trap dirt and grime over the years. You get a smooth, clean surface that feels great to the touch and makes your daily routine much more pleasant.
Demolishing a bathroom is honestly a nightmare that involves dust, noise, and weeks of workers walking in and out of your house. When you choose this restoration route, the job is usually done in a single day and you can use your shower again shortly after.
Moreover, the waste from a traditional tear-out creates piles of heavy rubble that end up filling up local landfills unnecessarily. By opting for this sustainable choice, you keep your old basin out of the trash while spending way less cash.
Think about the sheer amount of money you save on plumbing, tiling, and labor costs associated with a full renovation. You can take those extra funds and put them toward other upgrades like new light fixtures, mirrors, or fancy bathroom hardware.
Working in the neighborhood of Eastborough, Kansas, provides us with a unique chance to see how many beautiful homes keep their original charm. Since this area has a specific feel, preserving what you already have makes a lot of sense for maintaining your property value.
Regarding the local stats, our little pocket of Wichita in Sedgwick County, KS, is quite special even if the census data for our tiny population of zero is a bit of a quirk. With various ZIP codes covering this region, we are always ready to head your way for a site visit.
| Feature | Benefit to You | |
|---|---|---|
| Quick curing time | You get back to your routine fast | |
| Durable polymers | Your surface resists stains and scratches | |
| Professional application | No brush marks or uneven textures | |
| Low odor solutions | Your home stays breathable during the job |
First, we scrub the surface to get rid of every trace of soap scum, body oil, and mineral deposits that have built up over decades. This deep cleaning is vital because any leftover residue prevents the new finish from bonding properly to the base material.
Then, we carefully repair any deep pits or rust spots using a special filler that levels out the area. Once the filler dries, we sand it down until the whole surface feels as smooth as glass to your hand.
Following that, we mask off the surrounding walls, faucets, and floors to protect your home from any overspray. Finally, we spray on the high-tech coating using precision equipment that ensures an even, glossy application throughout the entire basin.
If your tub has stains that simply refuse to come off no matter how much scrubbing you do, it is time for a change. These stains are usually signs that the original finish has worn away, leaving the porous material underneath exposed to dirt.
Perhaps you notice a rough texture when you run your hand along the bottom of the tub. That texture is actually a breeding ground for bacteria, and it is a clear indicator that the protective layer is completely gone.
Also, if you see visible cracks or chips, you really need to address them before they lead to water leaks behind your wall. Fixing these small issues now prevents massive structural damage and expensive repairs to your subfloor or framing later on.
You might wonder if the smell will be overwhelming while we work in your house. Luckily, we use modern ventilation systems and specialized masks to keep the air quality in your home perfectly manageable during the entire procedure.
Transitioning into the actual application, you will notice how quickly we move to keep things moving along. Our team respects your schedule and makes sure to clean up every single piece of tape or protective plastic before we leave.
Once the finish is dry, you get a beautiful surface that looks exactly like a brand new installation. It really is a massive boost for your home, providing a sense of refreshment that makes you want to spend more time in your bathroom.
Before we show up, please clear out all your personal items like shampoos, soaps, and bath toys. It helps if you also remove shower curtains and any towels hanging nearby so we have plenty of room to move around.
Make sure the faucet is not dripping, because even a small leak can ruin the fresh finish before it has time to cure. If you have a leaky handle, just let us know so we can plan accordingly or advise you on how to stop it temporarily.
When we arrive, we will handle the final prep and check that everything is ready for the transformation. We pride ourselves on being tidy and respectful of your home, so you never have to worry about us leaving a mess behind.
Since you are curious about the cost, we are more than happy to come out to your property for a free quote. We believe in being transparent about our pricing so you know exactly what to expect before we even pick up a spray gun.
Talking to us is simple and comes with absolutely no pressure to commit if you are just in the research phase. We love helping neighbors understand the scope of their project and how we can best tailor our skills to your specific needs.
Just reach out and tell us a bit about your fixture, including the approximate size and any major issues you see. We will set up a time that fits your day and get you one step closer to having a bathroom you can finally love.
After we finish, you should avoid using harsh abrasive cleaners or steel wool pads on the new coating. A simple mixture of mild soap and water works perfectly to keep the surface shiny and clean for many years.
You might want to consider using a soft cloth or a non-scratch sponge for your regular cleaning routine. Keeping the surface dry between uses also helps prevent mineral buildup from hard water, which extends the life of your fresh new coating.
Since this surface is so durable, you will find it much easier to maintain than the original porcelain. You will honestly be surprised at how little effort it takes to keep your bathroom looking like it just got a professional makeover.
Throughout our time working in this field, we have seen all sorts of fixtures in various states of repair. Whether your tub is an antique cast iron model or a modern fiberglass unit, we have the know-how to make it shine again.
Because we care about the quality of our results, we stand by the work we perform on every single visit. You deserve a space that reflects your standards, and we strive to provide a finish that gives you that sense of satisfaction you want.
If you ever have questions about the care of your surface or anything else, our team is always just a message away. We enjoy building long-term relationships with homeowners who appreciate quality craftsmanship and honest, reliable service at a fair price.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Eastborough, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558