In Sunflower, Wichita, the Wichita technician we send repairs, sprays and caulks your tub where it stands.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Do you hate looking at that nasty stained wash basin every single morning? Fortunately, fixing this nasty problem does not require spending thousands on a chaotic bathroom overhaul. Instead, you can hire a local pro to spray a fresh protective coating right over your old acrylic or cast iron tub.
Maybe your bathroom fixtures look like they survived a couple of wars without any mercy. Fortunately, our crew transforms terrible surfaces into gorgeous centerpieces without tearing up your entire house. Which means you save loads of cash while getting that shiny new look you always wanted.
First off, the technician scrubs your entire basin using powerful industrial cleaning agents to strip away soap scum. Then, they patch up any chips or nasty cracks using heavy-duty bonding fillers. This thorough prep work lets the fresh layers stick properly for years of heavy daily use.
After that, the team tapes off your bathroom walls and floors to catch any stray spray particles. Next, they apply a specialized primer followed by multiple coats of high-grade aliphatic acrylic polyurethane. This careful layering gives you a smooth finish that feels amazing against your skin.
Working with nearby contractors keeps your hard-earned money right here in your community. On top of that, local teams understand regional water chemistry and humidity levels better than national chains. Consequently, your new surface cures properly and withstands local weather shifts without peeling away prematurely.
Plus, scheduling an onsite visit takes just a couple of minutes when you reach out today. Meanwhile, you can ask all the questions you want about color choices and drying times. This direct communication ensures you get exactly what you picture for your washroom update.
Replacing an old built-in basin involves smashing tile, ripping out drywall, and paying outrageous plumbing fees. However, spraying a fresh gloss over the existing shell keeps your plumbing intact and messes to a minimum. This smart approach lets you bypass weeks of loud construction noises.
Take a look at how these two common choices stack up against each other:
| Project Type | Average Cost | Time Required | Mess Level |
|---|---|---|---|
| Full Replacement | Very High | One to Two Weeks | Extreme Dust and Debris |
| Surface Spraying | Low | Just One Single Day | Very Minimal Cleanup |
As you can see, updating your current basin saves both your sanity and your wallet from total destruction. Furthermore, this method prevents old cast iron units from ending up in local landfills. Which means you make an eco-friendly choice while upgrading your interior spaces.
Hardware stores love selling cheap brush-on kits to unsuspecting homeowners looking for quick weekend projects. However, those DIY formulas usually bubble, peel, and discolor after only a few months of regular showers. This frustrating failure leaves you with a much bigger mess than you started with.
Professional technicians use industrial spray equipment and toxic-grade catalysts that consumers cannot buy legally. Furthermore, proper ventilation gear keeps the strong fumes away from your living spaces while the chemicals dry. Therefore, letting trained professionals handle the spraying protects your health and guarantees a lasting result.
Keeping your newly sprayed fixture sparkling clean requires nothing more than mild dish soap and a soft sponge. Never use abrasive scouring powders or steel wool pads because those harsh items scratch the gloss instantly. Instead, wipe down the walls after every bath to prevent mineral buildup from forming.
Additionally, avoid letting bath mats with heavy suction cups sit on the bottom for long stretches. Removing the mat after every use lets the fresh coating breathe and dry out completely. This simple habit extends the lifespan of your investment by several extra years.
Even though the sprayed layer resists heavy impacts quite well, dropping heavy tools can still cause ugly chips. Whenever you need to wash pets or large items, lay down a rubber mat for extra cushioning. This small precaution prevents accidental damage and keeps your bathroom looking pristine.
Should a tiny chip ever happen, call the original contractor back out for a fast touch-up service. Catching minor flaws early stops water from seeping underneath the protective shield and causing larger problems. Because of this proactive care, your bathroom retains its high-end charm indefinitely.
Homeowners living in Sunflower know how important it is to keep their properties looking sharp and well-maintained. Even though this Wichita neighborhood carries a small residential footprint with zero official residents in past counts, surrounding areas rely heavily on skilled trade workers. Because of this high regional demand, getting prompt scheduling remains totally achievable.
Properties scattered across Kansas feature diverse architectural styles ranging from mid-century builds to modern suburban houses. Regardless of your home age, outdated washrooms bring down your overall property value during appraisals. Updating your tired fixtures restores immediate visual appeal without breaking a sweat.
Stop closing your eyes every time you walk past that scratched, stained washing basin in your hallway bathroom. You deserve a relaxing soak in a smooth, gleaming tub that looks brand new again. Contact our local crew right now to request your absolutely free quote and get started on your home upgrade.
Our friendly representatives stand ready to answer your questions and schedule a convenient time for an onsite evaluation. Discover how affordable a stunning bathroom transformation can be when you work with experienced local professionals. Claim your free estimate today and take the first step toward a gorgeous home.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Sunflower, Wichita, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558