A dull or chipped tub in North La Crosse does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
Are you tired of looking at that stained, chipped, or outdated porcelain basin in your master bathroom? You can easily restore that worn-out surface to a brand new shine without spending a fortune on a full renovation.
Most folks think they need to rip everything out when the finish gets dull or starts peeling off. Tearing out a heavy, cast iron or steel unit is a massive headache that creates tons of dust and debris in your home. You will end up paying for a plumber, a tile setter, and a whole new fixture which costs thousands of dollars. Instead, you could choose to refresh the existing surface with a durable, chemical-resistant coating that makes it look like you just bought it yesterday.
Furthermore, these older units are often built much sturdier than the flimsy plastic ones sold in big-box stores today. You can keep that heavy, quality metal structure while gaining a fresh, glossy finish that makes the whole room feel clean and high-end. This approach saves you a pile of money and keeps your bathroom functional while we handle the job in just a single day. You will avoid the chaos of a construction zone and get back to using your space almost immediately.
Basically, our work involves a multi-step chemical cleaning and bonding procedure to ensure the new layer stays put for years. We start by removing all the old caulking and scrubbing away soap scum, hard water buildup, and any existing damage. Once the surface is perfectly clean, we apply a specialized etching compound that creates a microscopic texture for the high-tech resins to grip onto. This ensures the new layer acts like a second skin for your basin.
Then, we spray on a high-grade, synthetic enamel specifically designed for high-moisture environments like the one in La Crosse County. You get a smooth, non-porous finish that resists mold and mildew better than the original factory surface ever could. Because we use professional-grade ventilation systems, you do not have to worry about harsh smells lingering in your hallways or bedrooms. You will notice the difference immediately when you see that bright, reflective sheen covering up all those old cracks and stains.
When you decide to update your fixture this way, you are making a smart financial choice for your property. Our work fits perfectly into the budget-conscious lifestyle of many people living in this beautiful part of Wisconsin. With a median household income that values practical home improvements, choosing a cost-effective solution is a no-brainer for most homeowners. You will see an instant jump in how your house looks, which is perfect if you ever plan to list it on the market.
Besides saving cash, you are also helping the environment by keeping heavy waste out of local landfills. Most of these old fixtures are perfectly fine underneath the surface, so throwing them away is just a waste of good steel. You get the gratification of an eco-friendly project without having to sacrifice any of the luxury you want in your home. It is a win for your wallet and a win for our local community.
Maybe you are wondering if yours is too far gone to be saved. Even if you see deep gouges or areas where the metal is starting to show, we can usually patch those spots before applying the final coat. We use professional fillers that level out the bottom of the basin so that it feels solid and secure again. You should look for signs like:
| Indicator | What it means | |
|---|---|---|
| Dull finish | Soap buildup has worn down the shine | |
| Cracks or chips | Potential for water leaks behind the wall | |
| Discoloration | Deep staining that no cleaner can remove | |
| Rough texture | The original enamel has degraded over time |
Once you reach out, we will come to your location in the 54601 area to take a look at the project yourself. We do not believe in hidden fees or pushy sales tactics, so we provide a clear, free estimate on the spot. You will see exactly how we plan to tackle the job and what kind of results you can expect once we finish. We pride ourselves on being straightforward and honest with every single person who invites us into their home.
Because we serve the local population of over 50,000 residents, we have seen every kind of fixture you can imagine. From the clawfoot treasures of older homes to the standard alcove units in newer apartments, we have the tools to handle it all. You can trust that our methods are proven and our materials are top-tier. We want to make sure you are thrilled with the transformation so you tell your neighbors about your experience.
After we finish the job, you need to follow a few simple rules to keep it looking perfect. You should avoid using abrasive scrubbers or harsh scouring powders that might scratch the new resin. Instead, just use a mild, non-abrasive liquid cleaner and a soft sponge to wipe it down after each use. This simple habit preserves the longevity of the coating and keeps it looking polished for a long time.
You will find that your daily routine becomes much easier when you do not have to battle stubborn stains on a porous, damaged surface. Since the new layer is completely seamless, there are no tiny pores for dirt to hide in. You can maintain a pristine bathroom with half the effort you were putting in before. It truly is a simple way to achieve a feeling of relaxation every time you step into the room.
We treat every house like it is our own, making sure we protect your floors and walls while we work. Our focus is on delivering high-quality results that make a massive impact on your home value. You will never find us cutting corners or rushing through the process just to get to the next job. We take the time to do it right the first time because we live and work right here in this great community.
First, you should look at your fixtures and decide if they are worth saving, which they almost always are. Next, gather up your questions about the process, the timing, or the materials we use. Then, give us a shout to schedule your free estimate so we can come out and see what we can do for you. Finally, sit back and let us handle the mess while you prepare to enjoy a refreshed, beautiful bathroom.
You do not have to live with an eyesore for another day when a simple, professional fix is just a phone call away. We look forward to helping you improve your living space with our specialized service. You deserve a home that makes you feel proud, and we are here to make that happen for you. Reach out today to get the ball rolling on your project.
Choosing to restore instead of replace is the most intelligent move you can make for your property. You avoid the stress of a massive renovation while getting a beautiful result that lasts for many years. We are proud to offer this service to all our neighbors in this region. You will be amazed at the transformation, and we are excited to show you why so many people choose this path. Let us help you create the space you have always wanted.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around North La Crosse, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558