In Oak Hills, the Portland technician we send repairs, sprays and caulks your tub where it stands.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably look at that chipped and stained basin every morning and wish it looked like it did when the house was built. Replacing that heavy porcelain unit is a nightmare that involves smashing tiles and dealing with plumbing headaches for days on end.
Luckily, you can skip all that demolition by simply renewing the surface finish of your existing hardware. This process involves stripping away years of grime and applying a high-quality resin that makes everything look brand new again.
Investing in a full bathroom demolition creates a massive amount of dust and debris that stays in your vents for weeks. You end up paying thousands just for the labor of hauling away an old hunk of cast iron that has been sitting in your home since the middle of the last century.
Instead of burning cash on a total tear-out, you can opt for a specialized surface renewal that keeps your original plumbing lines perfectly intact. This saves you so much time and keeps your daily routine from being completely derailed by construction workers walking through your halls.
Once you decide to move forward, a skilled worker arrives at your home in the Portland metro area to prep the area thoroughly. They start by cleaning the surface with industrial acids to remove soap scum and mineral buildup that you cannot scrub off with regular household sprays.
After the area is bone-dry and masked off with plastic, the technician sprays a specialized bonding agent onto the porcelain or fiberglass shell. This creates a solid anchor for the final coating so that it stays put and keeps your space looking pristine for many years to come.
Choosing this route gives you a high degree of satisfaction because the final result feels smooth and looks bright. You get that feeling of pure relief when you step into a shower that no longer has those deep cracks or yellow stains from decades of water damage.
Since you are not buying a new tub, you save enough money to upgrade your faucets or buy new tiles for the walls. This approach lets you allocate your budget toward things that actually make the room feel better while keeping the core fixtures right where they belong.
| Feature | Benefit to You | |
|---|---|---|
| No demolition required | Zero mess and no ruined floor tiles | |
| Fast curing time | You can use your bathroom again in just one day | |
| Scratch-resistant finish | Keeps the surface looking clean and bright | |
| Cost-effective pricing | Massive savings compared to a total renovation |
Maintaining your renewed surface is much easier than you might think if you avoid using harsh abrasive sponges. You should stick to gentle liquid cleaners that do not contain heavy chemicals or scouring pads that could scratch the new gloss.
By keeping the surface wiped down after each use, you prevent water spots from building up over time. This tiny bit of effort keeps the shine alive and ensures you get the absolute most value from the service provided at your property.
Living in this quiet neighborhood within the outskirts of the major city provides a peaceful atmosphere for your family. With a population that stays small and tight-knit, you probably value the character of the older homes found throughout this region.
Many of these houses feature original bathtubs that are built much sturdier than the flimsy plastic ones sold today. Keeping those vintage pieces is a great way to preserve the charm of your house while making it functional for modern living.
We arrive on site to inspect your specific tub and give you an honest opinion on what can be achieved. Because we know every home is different, we look at the depth of the chips and the condition of the caulk around the perimeter.
When you are ready to proceed, we send you a written offer that outlines exactly what we do and how much it will cost. You never have to worry about hidden fees or surprise charges popping up after we finish the job, because we believe in total transparency.
If you want to see a major change without the stress of a full remodel, you should reach out to us today. We take pride in helping folks in your area turn their dingy bathrooms into bright and welcoming spaces that they can actually enjoy using.
Our process is quick and efficient because we know you have a busy life to lead. You deserve a bathroom that feels like a sanctuary, not a project that you keep putting off until next year.
People often worry about the smell of the chemicals during the application, but we use high-powered ventilation systems to keep the air clear. We ensure that you are not breathing in fumes while the new layer is being applied to the tub.
Another common question relates to how long the finish lasts under normal daily use. If you take care of the surface, you can expect it to look great for over a decade without any signs of peeling or fading.
You might be tempted to try a DIY kit from the store, but those often end in disaster with uneven textures and peeling paint. A professional application requires specialized spray equipment and a deep understanding of how to prep the substrate for a permanent bond.
When you hire a pro, you are paying for the experience that prevents common mistakes. We know how to navigate the curves and edges of your tub so that the final layer is smooth and consistent from corner to corner.
While we can work throughout the year, some people prefer to have this done when the weather is mild enough to open windows for ventilation. The curing process happens quickly, but good airflow always helps the final hardening stage move along nicely.
Since the work is completed on-site, we bring all the necessary tools and protection to ensure your floors and walls remain untouched. You stay in control of the project from start to finish, which means you have the final say on the scheduling.
Waiting to fix those cracks only makes the situation worse because water can seep behind the tub and cause mold or wood rot in the wall studs. Once the structural components underneath begin to fail, the cost of repair skyrockets compared to a simple surface fix.
Taking action now stops the damage in its tracks and restores the integrity of your wet area. You get the peace of mind that comes from knowing your home is in good shape and ready for whatever your family needs.
Getting started is as easy as reaching out for a free estimate. We visit your location, assess the scope of the work, and give you a straightforward price for the restoration of your bathroom fixture.
You have nothing to lose by asking for a price, and you have a beautiful new bathtub to gain. Let us help you find the best solution for your space so you can finally stop stressing about those ugly stains.
Now that you understand how simple this process can be, you can look forward to a bathroom that actually feels clean. Nothing beats the feeling of stepping into a basin that shines like glass and feels smooth under your skin.
By choosing to revitalize what you already own, you are making a smart decision for both your wallet and the environment. You avoid the waste of a landfill and you keep your home looking its absolute best for years to come.
Maintaining your property is the best way to keep its value high and your daily experience pleasant. You do not need a massive bank account to make impactful changes that transform the look and feel of your living environment.
Reach out for your free consultation today and let us show you how we can make your old tub look spectacular once again. You are one decision away from a much brighter and more enjoyable start to every single day.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Oak Hills, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558