In Rockcreek, the Portland technician we send repairs, sprays and caulks your tub where it stands.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You probably stare at those cracked tiles and stained basin walls every morning while brushing your teeth. This ugly mess makes your daily routine feel like a chore rather than a moment of peacefulness.
Replacing the whole unit is a nightmare because it costs way too much money and takes forever to finish. Most people do not realize that a simple surface renewal provides the same look for a fraction of the cost.
When you hire a pro to handle your bathroom fixture, they start by stripping away the old, gross layers of grime and soap scum. Think of it as a deep exfoliation for your hardware that gets deep into the pores of the material.
After the scrubbing, the team repairs any cracks or chips with special filler that blends in perfectly. This filling step makes sure your surface stays strong and avoids leaking water behind your walls later on.
Once everything is smooth, they spray a high-quality resin coating that bonds to your existing tub like a second skin. This new barrier gives you a shiny, bright finish that looks just like it came from the factory yesterday.
Choosing a neighbor who knows the area means you get someone who shows up on time without excuses. Being close to the heart of the Portland area helps me keep my travel costs down, so I pass those savings directly to you.
Working with someone right here in Oregon ensures you get personalized attention that big companies just cannot match. If you have a problem, I am just a short drive away, which gives you peace of mind that lasts for years.
Regarding the local vibe of this lovely spot with ZIP code 97229, people value hard work and honest results. My goal is to make sure your space feels brand new without the massive headache of a full demolition project.
Getting a new basin involves tearing up floors, moving plumbing pipes, and paying for heavy labor. You might end up waiting weeks for your bathroom to be usable again while contractors track dust all over your house.
Meanwhile, a quick resurfacing job usually finishes in one day, allowing you to use your tub again in just a couple of days. This speed is perfect if you have a busy life and cannot afford to shut down your home for a long renovation.
Beyond the time savings, you save thousands of dollars that you can spend on other home upgrades. It is a smart financial move that keeps your wallet happy while making your home look stunningly refined.
| Feature | Surface Renewal | Total Replacement | |
|---|---|---|---|
| Project Time | One Day | One to Two Weeks | |
| Cost | Low | Very High | |
| Mess | Minimal | Massive | |
| Durability | Excellent | Good |
Before I arrive to work my magic, you should clear off all your personal items like bottles and sponges. Removing these extras lets me reach every single corner of the basin without bumping into your stuff.
Make sure the area is dry and clean to help the new coating stick as tightly as possible. You should also open a window if you have one to help with ventilation while the fumes dissipate during the drying phase.
Taking these small steps makes the entire project run much faster and ensures a better final result. I really appreciate when you handle the small prep work, as it allows me to focus purely on the technical side of the job.
Once the new layer has cured, you must avoid using harsh chemicals or abrasive scrubbers on the finish. A gentle soap and a soft sponge work wonders to keep the shine alive for a long time.
Do not let water sit in pools for days, as standing water can eventually weaken the bond of any coating over time. A quick wipe down after every shower is all you really need to keep things looking pristine.
By following these easy tips, you protect your investment and maintain that fresh look for many years. You will find that keeping it clean is quite simple when the surface is smooth and free of deep, dark scratches.
You might worry about the fumes while the material dries, but proper ventilation takes care of that concern quickly. I use specialized equipment to keep the air moving, so you do not have to worry about strong smells lingering in your home.
Most homeowners find that the scent fades away within a few hours once the coating hardens into a rock-solid finish. You get a much safer and cleaner result than you would by trying to do this yourself with cheap kits from the store.
Doing it yourself often leads to drips, bubbles, and a finish that peels off within a few months. When you work with a pro, you get a guarantee that the work stays put and keeps your home looking tidy.
If your basin has deep rust stains that scrubbing cannot remove, it is definitely time to think about a change. These stains often signal that the original protective glaze has worn down completely, leaving the porous material exposed.
Another sign is when you feel rough patches under your feet while you stand in the shower. Those tiny crevices trap bacteria and mold, which makes it much harder to keep your bathroom hygienic for your family.
You deserve a space that makes you feel relaxed and happy every time you step inside. If you are ready to stop looking at those eyesores, I am ready to come out and give you a free estimate for the work.
Reaching out for a quote is easy and requires zero commitment from you. I will come to your location, inspect the current state of your fixtures, and explain exactly what I can do to fix them.
You can ask me any questions about the materials I use or how long the curing process takes for your specific setup. I believe in total transparency, so you will know exactly what you are paying for before I start any work.
Requesting a free estimate is the first step toward reclaiming your bathroom and enjoying a clean, modern aesthetic. Do not wait for the damage to get worse, because fixing it now saves you more money than waiting until the basin fails entirely.
I like to keep things laid back and honest when I visit your home. You will never feel pressured to buy anything you do not need, as I prefer to provide options that fit your specific goals.
I will take a look at the dimensions, the current damage, and the color you prefer for the update. You get to choose a bright white or an off-white shade that matches the rest of your bathroom decor perfectly.
Once I have all the details, I calculate the price on the spot and give you a clear written quote. You are then free to decide when you want to proceed with the project that brings back the utility of your space.
Upgrading your bathroom is one of the smartest ways to boost the appeal of your home. Potential buyers notice a clean and shiny tub immediately, which helps you sell your place faster if you decide to move later.
Even if you plan to stay forever, the feeling of a clean, well-maintained house adds to your overall happiness. You do not need to spend a fortune to get that updated look you keep seeing in magazines.
This service offers a practical and budget-friendly way to achieve a look that feels sophisticated and brand new. Let us talk about how we can transform your bathroom into a space that you actually love spending time in today.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Rockcreek, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558