A dull or chipped tub in Phoenix does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You can finally stop hiding your outdated tub behind that thick shower curtain!
Our local team of refinishing specialists brings your faded, chipped, or ugly tub back to life.
Actually, you can save thousands of dollars today by choosing a smart restoration over a costly replacement.
By opting for this modern spray-on restoration, you avoid the absolute nightmare of tearing out walls.
This means you get a glossy, durable finish that looks identical to a brand-new showroom model.
On top of that, the entire process takes less than a single day to complete.
Naturally, you want to know what this costs for your specific home.
Which is why we offer a completely free quote to every homeowner looking for an affordable upgrade.
To get started, simply reach out to us and we will walk you through the options.
First, we must look at what this specialized service actually entails for your home.
Many people mistakenly think we just apply a cheap coat of hardware store paint.
In reality, our technicians use industrial-grade acrylic urethane coatings that chemically bond to your original fixture.
To begin the process, we clean the old surface with specialized acid cleaners to strip away decades of soap scum.
After removing the grime, we repair every single chip, scratch, and rust spot with a durable waterproof filler.
This critical step ensures the new topcoat adheres flawlessly to the cast iron or fiberglass beneath it.
Next, we apply a proprietary bonding agent that acts like a chemical anchor.
Without this specialized primer, the new glossy finish would peel off within a few months of hot showers.
Consequently, our careful prep work guarantees your tub remains beautiful and easy to clean for many years.
| Restoration Step | What We Do | Concrete Benefit for You |
|---|---|---|
| Deep Acid Etching | Strip away soap scum and old mineral deposits | Creates a perfectly clean slate for maximum adhesion |
| Surface Repair | Fill in deep chips, rust spots, and cracks | Prevents future leaks and restores structural integrity |
| Chemical Bonding Agent | Apply a commercial-grade primer layer | Ensures the shiny new topcoat never peels or bubbles |
| Precision Spraying | Apply multiple layers of high-gloss acrylic urethane | Delivers a beautiful glaze that feels incredibly smooth |
If you have ever priced out a full bathroom remodel, you already know how fast costs spiral out of control.
Because a simple tub replacement often requires hiring plumbers, tile setters, and drywall contractors.
By choosing our restoration service, you bypass all that expensive labor and keep your hard-earned money.
Furthermore, older fixtures are often built with incredibly sturdy cast iron or heavy porcelain.
These vintage tubs retain heat much better than the cheap, flimsy plastic tubs sold in big-box stores today.
So, keeping your original heavy-duty fixture actually preserves the high quality of your home construction.
Let us not forget about the amazing time savings you enjoy with this clever repair method.
While a full demolition can easily leave your home dusty and unusable for two whole weeks, we finish in hours.
This lets you jump back into your clean, warm shower the very next day without any hassle.
When our local team pulls up, we treat your home with the utmost respect.
First, we set up heavy-duty exhaust fans to safely vent any paint fumes directly outside your windows.
This keeps your indoor air clean and prevents odors from lingering in your living spaces.
Following that setup, we meticulously mask off your bathroom floors, walls, and vanity with protective paper.
We also cover all your chrome faucets and shower heads to protect them from any accidental overspray.
As a result of this careful prep, we leave your bathroom cleaner than we found it.
Once the masking is complete, we spray the specialized glaze using a professional high-volume, low-pressure system.
This advanced tool allows us to apply a perfectly even, glassy coat without any brush strokes or drips.
Finally, we clean up our gear, peel away the tape, and explain how to care for your shiny new surface.
To keep your restored tub looking pristine, you must avoid abrasive cleaners like bleach or scrubbing powders.
Instead, you should use mild dish soap or gentle foaming bathroom sprays to wipe down the surface.
This simple routine preserves the brilliant shine and prevents microscratches from dulling the finish.
Additionally, you must never use suction-cup bathmats on your newly coated surface.
The constant pulling action of the cups can eventually damage the bond between the old tub and new glaze.
We recommend using a soft, non-slip fabric mat that you remove after each shower to keep things dry.
We absolutely love working in this beautiful Oswego County village situated right along the scenic Oswego River.
Whether you live near the canal locks or closer to the quiet residential streets, we know your neighborhood well.
Our team regularly drives through the 13135 ZIP code to help local families modernize their historic homes.
With a cozy local population of around 2,440 residents, this tight-knit community deserves top-tier home services.
We understand that the median household income of $42,660 means homeowners appreciate real value and honest pricing.
Which is why we never inflate our rates or add hidden fees to your final bill in Phoenix, New York.
Many older homes in our area feature gorgeous, deep soaking tubs that have simply lost their original luster.
Instead of sending those classic pieces of history to a local landfill, we love restoring them to their former glory.
This sustainable approach saves you cash while keeping the historic charm of our local architecture intact.
You might see cheap DIY painting kits at your local home improvement store and feel tempted to try them.
However, those store-bought epoxy kits lack the chemical bonding agents required for a long-lasting finish.
They almost always crack, peel, and turn a nasty shade of yellow within just a few months of use.
Moreover, inhaling the fumes from these strong chemical coatings without professional respirators is highly dangerous.
Our team wears specialized safety gear and uses commercial ventilation systems to keep everyone safe during the application.
Investing in professional service saves you from the double cost of fixing a failed DIY attempt later on.
When you hire us, you get a beautiful, uniform finish backed by our solid local warranty.
This gives you total peace of mind knowing that your investment is protected against peeling and discoloration.
Ultimately, our skilled hands deliver a level of refinement that store-bought rollers simply cannot match.
Are you ready to transform your dingy bathroom into a bright, welcoming oasis of comfort?
We make the entire estimation process incredibly simple, fast, and completely free of charge for you.
Our friendly local estimator will visit your home, inspect your fixture, and provide a clear, upfront price.
You do not have to live with a stained, rusty, or embarrassing bathtub for another single day.
Let us help you achieve the clean, modern look you deserve without the sky-high price tag of a remodel.
Contact our team today to request your free quote and take the first step toward a beautiful home!
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Phoenix, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558