A dull or chipped tub in Pound does not need a demolition crew. It needs one technician, one day and a sprayed finish that shines.
One number reaches the technician who would hold the gun. The figure comes on the call, not after a visit.
(866) 951-0558The voice on the line belongs to the trade, not to a switchboard reading a script. Two minutes of plain description are enough to price a standard tub.
You are likely staring at a scratched or dull basin in your bathroom right now. This worn surface makes your entire home feel outdated even when you clean it daily.
Instead of tearing out your entire plumbing setup and paying thousands for new fixtures, you should consider a restorative surface treatment. This specialized process gives your old basin a brand new lease on life without any major demolition.
You might wonder how a simple liquid application can actually fix a deep scratch or a permanent stain. The secret lies in the chemical bond created during the application of high-end industrial polymers to your existing porcelain or fiberglass.
This technique fills in porous areas and creates a smooth finish that resists future damage. Which means you save money while getting a look that provides absolute ease of use and visual appeal.
Besides the financial savings, you avoid the messy construction dust that stays in your home for weeks. Dealing with contractors who rip out walls is a nightmare you definitely want to avoid.
Living in a small spot like Pound, Wisconsin, means you value your hard-earned money and your time. With a median household income around $55,000, nobody wants to spend five figures on a bathroom renovation project.
Most people here appreciate how a refreshed basin brings a sense of relaxation to their daily morning routine. You will find that a glossy finish changes the entire mood of your space.
Everything starts with a deep cleaning to remove every trace of soap scum and mineral deposits. Our process then involves sanding the surface to ensure the new coating grips tightly.
After the prep work is finished, we spray a specialized, high-performance bonding agent. This layer acts like a permanent primer that prevents peeling down the road.
Next, we apply several coats of the final finish to ensure a thick and durable surface. You get a result that looks like you just bought a brand new fixture from the showroom.
| Benefit | Result |
| Time saved | The job takes one day |
| Cost effectiveness | Fraction of replacement price |
| Visual impact | Shiny like new porcelain |
You might worry about the smell or the fumes during the application process. We use high-grade ventilation equipment to keep the air clear while we work inside your home.
Many homeowners ask if this finish will peel off after a few months of heavy use. Since we use commercial grade resins, the material actually fuses with the substrate to create a long lasting bond.
With a population of 435, our community relies on word of mouth for quality work. You deserve a service provider who treats your property with the same care they would give their own house.
Whether you live near the 54161 area or just outside, we pride ourselves on showing up on time. Reliability is just as important as the quality of the finish we leave behind.
You should check your basin for dull patches or areas where the original shine has vanished. If your basin feels rough to the touch even after scrubbing, it is losing its protective layer.
When you notice small rust spots near the drain, you need to act fast before they get worse. A quick touch-up keeps the metal underneath from corroding further and saves you from a total replacement later.
Firstly, we mask off all the surrounding tiles and fixtures to prevent any overspray. This protection ensures that the only thing getting a makeover is the basin itself.
Secondly, we inspect the caulk lines around the edges to see if they need replacing. Old caulk often hides mold, so we remove it completely and apply fresh, waterproof sealant.
Thirdly, we perform the main application with professional spray gear to ensure a perfectly smooth coat. This uniform distribution creates the glossy look that makes your bathroom feel like a luxury getaway.
You might think that DIY kits from the store are a cheaper way to go. However, those kits often lack the chemical strength needed for a lasting result.
Those cheap cans usually flake or turn yellow within a few months of regular showers. You save yourself the headache of doing it twice by hiring someone who uses industrial-grade supplies.
Perhaps you are thinking about selling your home in the near future. A sparkling clean basin makes a huge impression on potential buyers walking through your house.
People notice the details when they evaluate a property. A dingy or stained basin can make the whole bathroom look unhygienic, which drives away potential offers.
Think about how much time you spend in your bathroom every single week. Improving the look of your space significantly upgrades your mood during your morning routine.
Choosing a bright white or a soft almond color can make your room feel much larger. You get a fresh start without the massive price tag of a full remodel.
You avoid the frustration of bad results by relying on someone who does this every single day. We understand the unique challenges of the plumbing fixtures found in older homes in the Midwest.
Every job brings its own quirks, but experience teaches us how to handle every situation correctly. You can trust that the surface will be smooth, durable, and ready to use shortly after we finish.
You have nothing to lose by asking for a free quote to see what is possible. It helps you budget for your home improvements without any pressure or obligation.
When you reach out, we can discuss the specific dimensions and current condition of your basin. We look forward to helping you improve your home.
Maintaining your newly treated surface is simple if you follow a few basic rules. Avoid using harsh scouring pads or acidic cleaners that can scratch the new finish over time.
Stick to mild soap and a soft cloth to keep the shine for as long as possible. You will notice that cleaning becomes much easier because the smooth finish repels dirt and grime.
You get to keep the original fixtures which are often made of better material than what you buy today. Many older basins are built with heavy cast iron that holds heat much better than modern plastic.
Reviving that iron basin is better for the environment than throwing it into a landfill. You make a responsible choice for your wallet and for the planet at the same time.
Now that you know how much a simple surface upgrade can do, you should take action. Reach out today to schedule your assessment and see how we can help.
You deserve a space that makes you feel proud when you step inside. We are ready to help you reach that goal with our specialized service.
You should ask about the drying time so you can plan your day accordingly. Most finishes require a full day to cure before they can get wet again.
Ask about the warranty we provide on our work to ensure your peace of mind. We stand behind our results because we know the quality of the materials we select.
Working with someone in your own community means you get faster responses and more personal service. You are not just a number in a database when you choose local contractors.
We care about our reputation in the county because we live and work here too. Your satisfaction is our top priority because we want you to tell your neighbors about our work.
Maybe you want to change the color of your basin to match a new wall paint or tile floor. A fresh color choice can completely modernize your bathroom without changing the layout.
The range of colors available allows you to pick the perfect tone for your decor. You gain the ability to customize your space exactly how you want it to look.
You might be wondering if this is a temporary fix for a dying fixture. Actually, when done right, this process lasts for many years with proper care and maintenance.
You get a professional finish that stands up to the rigors of daily use. It is a smart way to bridge the gap between where you are and a full remodel.
You have all the information you need to make an informed choice for your home. Stop staring at that dull surface and start imagining how good it will look clean.
Contact us to get your free estimate and find out how we can help. We are ready to make your bathroom look amazing again today.
Three quiet stages carry the whole result. They are also the ones nobody sees in the after photo.
Stage 1 of 3
A reglaze fails or lasts on what happens before the gun comes out. The old surface gets scrubbed of soap film and silicone, etched or primed so the new material has something to grip, then wet sanded until it feels like fine paper. Skip any of that and the prettiest coat in the world lets go within a year, which is exactly the story most peeling tubs tell us.
Stage 2 of 3
Chips, rust blooms and worn drain rings are ground back to sound material and rebuilt with polyester filler, then sanded flush until a fingertip cannot find the spot. Coating over damage only photographs well on day one; a repair you cannot feel is what keeps the finish honest for years.
Stage 3 of 3
The topcoat goes on in fine sprayed passes with an extractor pulling air out the window the whole time. Sprayed layers flow together into one even skin, which is why the result reads as gloss rather than as paint. Brushes and rollers leave the texture that gives cheap refinishing its reputation.
Three real ways out of a worn tub. We only do the first one, so the other two columns are simply what we would tell a friend.
| The question | Reglazing in place | Acrylic liner | Full replacement |
|---|---|---|---|
| What a standard tub costs | $350 to $800 | $1,600 to $4,000 | $3,000 to $10,000 once walls and plumbing join in |
| Bathroom out of action | One day, then the cure | Weeks of lead time, then a fitting day | One to two weeks of trades |
| Demolition involved | None at all | None, but the old tub is sealed inside | Walls opened, floor patched, debris hauled |
| Honest life expectancy | Five years and up when cared for | Long, unless water creeps between the shells | Decades |
| Watch out for | Prep shortcuts by cut-rate crews | A spongy feel and hidden moisture | The budget doubling mid-project |
If your tub is cracked through, actively leaking underneath, or you simply want a different fixture, reglazing is the wrong tool, a verdict you will hear on the very first call.
Pass 1
Soap scum, silicone and old wax stripped, then the surface etched or bonded so the coating can bite.
Pass 2
Every ding ground out, filled and sanded flush. The repairs disappear under the coating instead of through it.
Pass 3
Tile, faucet, floor and glass papered off. Overspray lands on masking paper, never on grout or chrome.
Pass 4
Primer, then gloss coats laid on in thin passes until the surface reads as one poured skin.
Pass 5
The finish hardens on its own clock, 24 to 48 hours. We tape the door and leave the tub in peace.
Pass 6
Old caulk goes out with the old finish. A new mildew-resistant bead seals tub to tile on the way out.
A reglazed tub is your old tub wearing a professional coating. That is a fine thing to be, as long as everyone knows it going in.
A sprayed acrylic urethane skin, bonded to prepared porcelain, steel or fiberglass. It is smooth, glossy, warm to the touch and fully waterproof. Done properly it gives five years and more of daily service, and plenty of our tubs sail well past that with nothing but gentle cleaning.
It is not factory enamel fired onto iron at kiln temperatures, and no honest refinisher will tell you otherwise. It can be scratched by grit, dulled by harsh powders and lifted by standing water in a spot where caulk has failed. It is a durable coating, not a new tub, and it is priced like one.
Two minutes
ZIP, what the tub is made of, what bothers you about it. Said out loud it goes faster than typing, and a photo can follow later if the case is odd.
The same call
The technician who would do the work asks his questions and names a firm figure for a standard job, then confirms it in writing before any van is booked.
You set the date
One van, one technician, drop cloths from the front door to the bathroom. Water off for nothing; only the tub is out of service.
Most of that day
Damage filled and sanded, the room masked, extractor running, then the primer and gloss coats go on in thin, even passes.
24 to 48 hours
The finish hardens untouched, the new caulk bead goes in, and you run the first bath knowing exactly what was done and what to expect of it.
| What we quote | Typical range | Reading the number |
|---|---|---|
| Standard bathtub, reglazed complete | $350 - $800 | Clean, etch, repairs, sprayed gloss and fresh caulk. |
| Chip or rust repair alone | $150 - $300 | When the finish is sound and only one wound needs closing. |
| Clawfoot tub, inside and out | $700 - $1,300 | Two surfaces, more masking, and paint-grade feet if you wish. |
| Shower pan or base | $300 - $550 | Same process on the floor you stand on every morning. |
| Caulk renewal with the job | $90 - $180 | Old bead cut out, mildew-resistant line laid in. |
| Small job minimum | around $250 | The van, the materials and the cure time exist even for tiny work. |
Heavy previous coatings that must be stripped, unusual colors and badly pitted iron push a job toward the top of its bracket. The written price reaches you before the van is even loaded, and it holds.
Ventilation is not a courtesy, it is part of the job. The extractor runs from the first solvent wipe to the last sprayed pass, pulling air out the window instead of through your hallway, and the technician wears supplied air even when the household has gone out for the day. By the evening the bathroom smells like a bathroom again.
The materials are the professional two-part systems made for this trade, mixed fresh on site, never the single-can kits sold next to the paint rollers. It is the difference between a finish that cures into a hard skin and one that stays soft enough to peel at the drain within a season, and it is most of the reason our work carries a written workmanship promise against peeling and loss of adhesion.
And the schedule respects the cure. We tell you in writing when the tub goes back into service, 24 hours for most jobs and 48 for the cautious ones, because handing a family a beautiful surface and letting them ruin it that same night helps nobody. If anything in our workmanship lets go early, the technician comes back and makes it right without a discussion about whose fault the water was.
Strong while spraying, gone surprisingly fast. The extractor vents the room to the outside for the whole job around Pound, so the rest of the home stays livable, and by the next morning the odor has left with the fumes. Pregnant households and bird owners get the frank version of this talk before booking.
Between 24 and 48 hours after the final coat, and the exact time is written on the paperwork you keep. The first bath is not a gamble; it is a date.
Any color. The most common request is retiring an avocado, pink or almond tub to white, and the coating is tinted before it is sprayed, so the new color is in the material rather than painted over it.
Yes. The prep changes, the primer changes, the result reads the same. Fiberglass with soft, flexing spots gets extra reinforcement talk first, because coating a moving floor is how warranties die.
Now the old coating comes fully off, which is honest work we price plainly, and then the job proceeds as if the tub had never been touched. Peeling almost always means the first crew skipped the etch or sprayed over silicone, not that your tub rejects coatings.
Five years is the floor we are comfortable promising out loud, not the ceiling. With soft cleaners, no standing mats and caulk kept sound, these finishes routinely serve a decade. What we refuse to do is whisper twenty and hope you lose our number.
Zoom for the lay of the land; the link lists further down name every community the van reaches from here.
The technician who picks up when you call works these streets, so the ledger below is home turf rather than trivia.
Somewhere under that worn surface is the tub you chose. One day brings it back.
Call (866) 951-0558